https://community.hpe.com/t5/operating-system-hp-ux/proc-table-is-full/m-p/2528103#M890055 proc: table is full<BR /><BR />What is the kernel parameter that I can change to resolve this problem. I have @1000-1500 logins on this machine at any given time. Mon, 14 May 2001 14:22:53 GMT Jody Bennett 2001-05-14T14:22:53Z https://community.hpe.com/t5/operating-system-hp-ux/proc-table-is-full/m-p/2528103#M890055 proc: table is full<BR /><BR />What is the kernel parameter that I can change to resolve this problem. I have @1000-1500 logins on this machine at any given time. Mon, 14 May 2001 14:22:53 GMT https://community.hpe.com/t5/operating-system-hp-ux/proc-table-is-full/m-p/2528103#M890055 Jody Bennett 2001-05-14T14:22:53Z https://community.hpe.com/t5/operating-system-hp-ux/proc-table-is-full/m-p/2528104#M890056 You need to increase NPROC and gen a new kernel; you can do all of this within SAM.<BR /><BR />Regards, Clay Mon, 14 May 2001 14:24:37 GMT https://community.hpe.com/t5/operating-system-hp-ux/proc-table-is-full/m-p/2528104#M890056 A. Clay Stephenson 2001-05-14T14:24:37Z https://community.hpe.com/t5/operating-system-hp-ux/proc-table-is-full/m-p/2528105#M890057 Thanks for the help. That is what I needed. Mon, 14 May 2001 14:31:07 GMT https://community.hpe.com/t5/operating-system-hp-ux/proc-table-is-full/m-p/2528105#M890057 Jody Bennett 2001-05-14T14:31:07Z