topic Re: why inode 2 for root in Operating System - HP-UX

why inode 2 for root

Vijaya Kumar_3 — Mon, 10 Nov 2003 15:24:56 GMT

Hi

I was just wondering someone gimme an answer for this question..
I referred many unix flavors and the inode for / is always 2.
$ ls -id
2 .
$ pwd
/
$
I need an answer for this? I also notice some other directories under root are having inode 2...any reasons...
Thanks in advance
Vijay

Re: why inode 2 for root

doug mielke — Mon, 10 Nov 2003 15:32:52 GMT

the other '2's under / should be mount points. Inode numbers are not duplicated in a specific filesystem.

Re: why inode 2 for root

Joris Denayer — Mon, 10 Nov 2003 15:38:59 GMT

Vijay,

The inode number givven to the top directory of your filesystem is entirly file-system dependent.
Anyway, each filesystem on your system as a top-directory and will have this inodenumber for it's topdirectory.

Why do you see multiple 2's ?
Well, these are the directories on which other filesystems are mounted. The inode of the topdirectory of the mounted filesystem is mapped over the inode of the mount-point.

As a test, you could simply umount such a filesystem, if not in use of course. And you will see that it's inode number is not longer 2, but something else.
Mount the filesystem again on it's mountpoint, and the mountpoint directory's inode is again 2.

There exist also good books about the in's and out's of the UNIX OS, where this is explained in extenso.

Joris

Re: why inode 2 for root

curt larson_1 — Mon, 10 Nov 2003 15:58:26 GMT

the inode for the mount point for every file system will be 2, i.e. /. The same as for /var, /usr, /opt, etc. if they are seperate file systems. Why? I'm not sure, other then, the mount point is always the first entry in the file system, except for the superblock info.

Re: why inode 2 for root

A. Clay Stephenson — Mon, 10 Nov 2003 17:02:39 GMT

I suppose the real question is why not 1? Inode 1 is used for the bad blocks list. Inode 2 is always the root inode for any filesystem. Depending upon the OS and filesystem type other low-number inodes are used for other purposes.

Re: why inode 2 for root

Kevin Wright — Mon, 10 Nov 2003 17:05:24 GMT

You'll have to ask the engineers at AT&T ro Berkeley I suppose. It's just convention as to why they chose the number 2.

Re: why inode 2 for root

PVR — Mon, 10 Nov 2003 18:07:06 GMT

All file system's root directory will be using inode 2.

reason might be.....

Accessing a file in Unix start by searching it's entry in the directory. Each directory's inode or it's datablock contains all it's member filenames and their inode. So it has to be a permanent inode.

I don't know where inode 1 is used!!!??