topic Re: Glance Plus Adviser Script in Operating System - HP-UX

Glance Plus Adviser Script

David Fosgate_1 — Fri, 10 Nov 2000 14:04:46 GMT

I have all the tools installed and somewhat working, now for some customization. I'm reviewing the Adviser Syntax manual and wanted to test an example on page 20. I think the script will launch a window from an iconed session of gpm when the alarm conditions are meet.

Here's the paragraph and example from page 20:
ALARM Example: Using COMPOUND Statements
Use the following example to use a COMPOUND statement within the ALARM statement. This example shows you how to make the Adviser open a window when an event occurs and how to print a statement to your originating GlancePlus shell:

ALARM cpu_bottleneck > 90 FOR 1 MINUTE
START {
RED ALERT "Your CPU is bottlenecked."
GPM -rpt cpugraph
PRINT "CPU is running at: ", gbl_cpu_total_util
}
END
RESET ALERT "CPU crisis is over."

I make the changes and the script checker complains?

What am I missing?

Thanks in advance for the help!!

Re: Glance Plus Adviser Script

CHRIS_ANORUO — Fri, 10 Nov 2000 14:45:24 GMT

Remove the line "GPM -rpt cpugraph " and try again.

Re: Glance Plus Adviser Script

David Fosgate_1 — Fri, 10 Nov 2000 15:17:20 GMT

Chris,

If I remove that line, will I get the gpm window as expected?
If I'm reading the example correctly, I can have the adviser alarm launch a window from an icon alerting me to the problem?

Thanks

Re: Glance Plus Adviser Script

Jim Welch — Sat, 11 Nov 2000 00:18:39 GMT

Are you modifying the gpm adviser syntax or writing an adviser script for glance? GPM is not a valid keyword in glance (per my advser syntax help), but it is in gpm.

Re: Glance Plus Adviser Script

Wayne Hanner_1 — Fri, 01 Jun 2001 02:21:52 GMT

do you know where i can find an advisor syntax manual on line?