topic Re: disk belly up? in Operating System - HP-UX

disk belly up?

Randy_9 — Mon, 28 Oct 2002 23:10:13 GMT

I believe I am seeing the demise of one of my disks.

From /var/adm/syslog/syslog.log

Oct 28 13:10:10 isis vmunix:
Oct 28 13:14:28 isis above message repeats 3 times
Oct 28 13:14:55 isis vmunix: I/O hardware probe timed out
Oct 28 13:14:55 isis vmunix: Last successful probe at path 8/16/5.2
Oct 28 13:15:14 isis vmunix:
Oct 28 13:15:14 isis vmunix: SCSI: Request Timeout; Abort -- lbolt: 61100873, dev: bc013000, io_id: 10774a5
Oct 28 13:20:18 isis vmunix: SCSI: Request Timeout; Abort -- lbolt: 61131273, dev: bc013000, io_id: 10774a5
Oct 28 13:25:22 isis vmunix: SCSI: Request Timeout; Abort -- lbolt: 61161673, dev: bc013000, io_id: 10774a5

/dev/dsk: (One of 5 disks)
brw-r----- 1 bin sys 31 0x013000 Aug 16 2001 c1t3d0

From an old "diskinfo" query record:
disk 4 8/16/5.3.0 sdisk NO_HW DEVICE SEAGATE ST32550W
/dev/dsk/c1t3d0 /dev/rdsk/c1t3d0

The "ioscan" command hangs, and I have to terminate the window the end the process.

I don't see this disk as being configured via "vgdisplay" for the VG's on this system.

Thoughts....

Thanks,

Randy

Re: disk belly up?

Anil C. Sedha — Mon, 28 Oct 2002 23:21:26 GMT

Hi Randy,

From what you have listed, i agree that the disk is giving issues. You may try rebooting the box in single user mode.

If there is any issue with the driver configuration, the box will automatically reconfigure it. Else, get ready to call HP for replacement.

Regards,
Anil

Re: disk belly up?

erics_1 — Mon, 28 Oct 2002 23:24:34 GMT

Randy,

I would agree that your disk is most likely in need of being replaced. You could most likely run an ioscan command for anything but disks and get it to return without hanging. Something like ioscan-fnC tape for instance. You can do a strings /etc/lvmtab to see if this disk is part of a volume group. Regardless, I'd open a call for hardware support if your disk is covered.

Hope this helps,
Eric

Re: disk belly up?

Randy_9 — Mon, 28 Oct 2002 23:33:27 GMT

I'll be bringing it down tomorrow AM. Thanks for the input. Points assigned.

Randy

Re: disk belly up?

Alan Edwards — Wed, 30 Oct 2002 23:15:27 GMT

As you are not seeing any disks it could be a controller/cable issue. The addresses do not match; the error is at 8/16/5.2, but the disk you are talking about is 8/16/5.3

Alan