https://community.hpe.com/t5/operating-system-hp-ux/dlt8000-driver/m-p/2535943#M898897 Hello, I have a problem with a DLT8000 tape drive connected to a HP 10.20 box, in SAM this and a DDS3 internal drive are using a tape2 driver; any operation that I try to do, I get a I/O error, the machine as another internal DDS3 drive, this one is using stape driver and is working fine. How can I change the driver for the DDS3 and the DLT8000 drive from tape2 to stape, assuming this is the problem for the I/O error.<BR /><BR />Thanks Mon, 04 Jun 2001 09:02:39 GMT Bruno Cunha 2001-06-04T09:02:39Z https://community.hpe.com/t5/operating-system-hp-ux/dlt8000-driver/m-p/2535943#M898897 Hello, I have a problem with a DLT8000 tape drive connected to a HP 10.20 box, in SAM this and a DDS3 internal drive are using a tape2 driver; any operation that I try to do, I get a I/O error, the machine as another internal DDS3 drive, this one is using stape driver and is working fine. How can I change the driver for the DDS3 and the DLT8000 drive from tape2 to stape, assuming this is the problem for the I/O error.<BR /><BR />Thanks Mon, 04 Jun 2001 09:02:39 GMT https://community.hpe.com/t5/operating-system-hp-ux/dlt8000-driver/m-p/2535943#M898897 Bruno Cunha 2001-06-04T09:02:39Z https://community.hpe.com/t5/operating-system-hp-ux/dlt8000-driver/m-p/2535944#M898898 <BR />In your /stand/system file specifty the driver, stape, and the path of your tape devices you want this driver to use, eg;<BR /><BR />stape 10/5/2.0<BR />stape 8/8/0.4.0<BR /><BR />Then build a new kernel and reboot.<BR /> Mon, 04 Jun 2001 09:10:52 GMT https://community.hpe.com/t5/operating-system-hp-ux/dlt8000-driver/m-p/2535944#M898898 Stefan Farrelly 2001-06-04T09:10:52Z