topic Re: acentuated words... in Operating System - HP-UX

acentuated words...

Javier Juarez — Mon, 04 Jun 2001 22:13:52 GMT

Hi!
Anybody knows how can I print acentuated words, like "transacci?n, ?ste, pap? " etc.?

Re: acentuated words...

Carlos Fernandez Riera — Tue, 05 Jun 2001 06:33:39 GMT

See:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x670b72106351d5118fef0090279cd0f9,00.html

Re: acentuated words...

Wodisch — Tue, 05 Jun 2001 13:45:56 GMT

Hello Javier,

you need a lot things set up correctly:
- the font for the terminal window
- the keyboard enconding/mapping
- the program (i.e. "sh" does NOT do it!)

For the first you need to start an X-client
with the correct font, e.g. "client -fn FONT",
and that font need to end with the proper ISO
enconding (I am not certain wether ISO8859-1
is sufficient for you - test with "xfd").

Then your keyboard must map your local keys
to the same code numbers, as your font does;
be careful: HP keyboards tend to use HP-ROMAN.
Use "xmodmap -pk" to check.

And last: if you try that within your shell,
you need to change to the korn-shell, for
the POSIX shell does NOT allow it, and still
you need to set something like
stty -istrip cs8
in your session (or ".profile").

HTH,
Wodisch

Re: acentuated words...

Javier Juarez — Tue, 05 Jun 2001 16:10:27 GMT

Thanks Carlos, thanks wodisch, basically the question was, How send this characters to a printer?

Re: acentuated words...

Carlos Fernandez Riera — Wed, 06 Jun 2001 08:25:13 GMT

AH!

Configure your printer.. set the correct character set as LATIN-8 or something like this. See printer's manual.