https://community.hpe.com/t5/operating-system-hp-ux/biod/m-p/3070775#M904845 proccesses named biod write the following error message to rc.log over and over again and cause / to be 100% full:<BR />"Attempting to set Non-blocking IO caused: Bad file number" Mon, 15 Sep 2003 05:22:01 GMT Alex Lavrov 2003-09-15T05:22:01Z https://community.hpe.com/t5/operating-system-hp-ux/biod/m-p/3070775#M904845 proccesses named biod write the following error message to rc.log over and over again and cause / to be 100% full:<BR />"Attempting to set Non-blocking IO caused: Bad file number" Mon, 15 Sep 2003 05:22:01 GMT https://community.hpe.com/t5/operating-system-hp-ux/biod/m-p/3070775#M904845 Alex Lavrov 2003-09-15T05:22:01Z https://community.hpe.com/t5/operating-system-hp-ux/biod/m-p/3070776#M904846 I'm not sure exactly whats going on here but biod is and NFS client process. I would check to see if you have any NFS mounts that aren't behaving properly. Mon, 15 Sep 2003 06:10:41 GMT https://community.hpe.com/t5/operating-system-hp-ux/biod/m-p/3070776#M904846 Mark Grant 2003-09-15T06:10:41Z https://community.hpe.com/t5/operating-system-hp-ux/biod/m-p/3070777#M904847 Hi Alex,<BR /><BR />Check next question,<BR /><BR /><A href="http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x74d7506d69a7d711abdc0090277a778c,00.html" target="_blank">http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x74d7506d69a7d711abdc0090277a778c,00.html</A><BR /><BR />Hope it helps,<BR /><BR />Robert-Jan Mon, 15 Sep 2003 06:28:19 GMT https://community.hpe.com/t5/operating-system-hp-ux/biod/m-p/3070777#M904847 Robert-Jan Goossens 2003-09-15T06:28:19Z