topic Re: osmgui in Operating System - HP-UX

osmgui

Ken Scharpell — Thu, 14 Sep 2000 06:27:37 GMT

Im trying to start my EMC osmgui or symmconsole program and I get an error;
no physical device attached
Any ideas as to what the problem is ?

Re: osmgui

Stefan Farrelly — Thu, 14 Sep 2000 06:33:46 GMT

osmgui/symmconsole need plenty of sempahores just to fire up, once theyre running they free up the semaphores they needed so its difficult to spot this is the problem. Increase your semaphores (semmns and semmni) and rebuild your kernel, reboot then retry.

Re: osmgui

Frank Grabner — Fri, 15 Sep 2000 16:52:27 GMT

Hi Ken,

it looks like you did'nt define the Gatekeepers in the ECC. Which version of ECC are you using?
The ECC or OpenSymetrixManager (old Version) needs a Gatekeeper to talk to the Box.
To start the symmConsole you need to do the following:

1. source the Environment (/usr/emc/ECC/symmappsrc.(c)sh , depends on your shell)
2. start symmConsole
3. Press the right mouse button and start the poller
4. Launch the osmgui

Hope this helps

Frank