https://community.hpe.com/t5/operating-system-hp-ux/serial-port-emulator-on-hp-ux/m-p/2996147#M913655 You can use a crossover cable (aka, a printer cable or null-modem cable) then run cu or kermit on the appropriate device file. Thu, 12 Jun 2003 18:07:15 GMT Bill Hassell 2003-06-12T18:07:15Z https://community.hpe.com/t5/operating-system-hp-ux/serial-port-emulator-on-hp-ux/m-p/2996146#M913654 Hi, <BR /> I have a headless Sparc LX machine which I want to connect to via the serial port. For reasons beyond the scope of this message I am not able to use hyperterminal and would like to connect via an HP-UX workstation. I've never done this before and any help would be appreciated. <BR /><BR />Thx, <BR />Tim Thu, 12 Jun 2003 17:23:18 GMT https://community.hpe.com/t5/operating-system-hp-ux/serial-port-emulator-on-hp-ux/m-p/2996146#M913654 Tim Stallman 2003-06-12T17:23:18Z https://community.hpe.com/t5/operating-system-hp-ux/serial-port-emulator-on-hp-ux/m-p/2996147#M913655 You can use a crossover cable (aka, a printer cable or null-modem cable) then run cu or kermit on the appropriate device file. Thu, 12 Jun 2003 18:07:15 GMT https://community.hpe.com/t5/operating-system-hp-ux/serial-port-emulator-on-hp-ux/m-p/2996147#M913655 Bill Hassell 2003-06-12T18:07:15Z