topic Re: utmp corruption? in Operating System - HP-UX

utmp corruption?

Nishan Sandhar — Thu, 28 Feb 2002 00:55:53 GMT

It appears that my /etc/utmp file is corrupted. The who command shows users being logged in, who are actually not logged in.

Also, when trying to change the password command, it fails with:

$ passwd
Usage: passwd [ -F file ] [ name ]
$

In addition, the perl "getlogin" function (which utilizes the getlogin() in C/Unix) also fails.

The commonality is the /etc/utmp file.

Is there a way to reset the file? Could it be something else?

Re: utmp corruption?

SHABU KHAN — Thu, 28 Feb 2002 01:01:54 GMT

Hi,

I would just zero that file.. that should fix the problem

> /etc/utmp

There are a lot threads out there in this forum which discusses this... try a search on utmp..

-Shabu

Re: utmp corruption?

Michael Tully — Thu, 28 Feb 2002 01:07:07 GMT

Hi,

Once the utmp file has become corrupted I don't
believe that there is a way to actually fix it.

# rm /etc/utmp
# touch /etc/utmp

When using the passwd command you must specify
a user account e.g.

# passwd fred (or a force change)
# passwd -f fred

HTH
-Michael

Re: utmp corruption?

James R. Ferguson — Thu, 28 Feb 2002 01:07:43 GMT

Hi:

You will need to drop to single-user mode, null the file and reboot.

# cat /dev/null > /etc/wtmp

If you are running 11.0 make sure you have patch PHNE_24762 installed.

Regards!

...JRF...

Re: utmp corruption?

Animesh Chakraborty — Thu, 28 Feb 2002 01:10:46 GMT

Hi

//quote//

The utmp file can be manipulated with the fwtmp command.

1.check the last modification time of the /etc/utmp file
ls -l /etc/utmp
-rw-r--r-- 1 root root 1620 Jun 28 09:22 /etc/utmp

2.convert the binary /etc/utmp file to ascii :
/usr/sbin/acct/fwtmp /tmp/utmp.ascii

3.edit the /tmp/utmp.ascii file to remove the old entries
Note : the entries are sorted by date, simply use the login time reported
by
who(1) to find the lines to remove.

4.convert the file back to binary format :
/usr/sbin/acct/fwtmp -ic /tmp/utmp.binary

5.verify that all unwanted entries have been removed from the new file :
who /tmp/utmp.binary

6.verify that the /etc/utmp file has not been modified since the beginning of
this procedure :
ls -l /etc/utmp
-rw-r--r-- 1 root root 1620 Jun 28 09:22 /etc/utmp
If the file has been updated do all the steps again.

7.replace the existing /etc/utmp file with the new one :
mv /tmp/utmp.binary /etc/utmp

8.verify that the file still has the same ownership and permissions :
ls -l /etc/utmp
-rw-r--r-- 1 root root 1600 Jun 28 09:30 /etc/utmp

The who command will now report the correct information.

//quote//
Cheers
Animesh

Re: utmp corruption?

steven Burgess_2 — Thu, 28 Feb 2002 01:11:45 GMT

There is also a programme called utmp_fix which you can run on an id to remove all utmp entries , i have attached the binary to this reply