topic sendmail in Operating System - HP-UX

sendmail

dennis bergman — Wed, 01 Aug 2001 15:15:35 GMT

I need to set up sendmail on a couple boxes( 10.20 & 11). They should just be relays. Ive never configured sendmail before so any info would be great.

Thanks in advance

Re: sendmail

Kevin Wright — Wed, 01 Aug 2001 15:18:55 GMT

See sendmail.org for help.
but most likely you just want to set your DS variable to your 'smart relay'..maybe an exchange server.
stop and restart the daemon and you should be able to send mail.

Re: sendmail

Dan Bonham — Wed, 01 Aug 2001 15:40:41 GMT

Yes,
You do want to change your DS line. it is in the /etc/mail/sendmail.cf file. You will also want to check a few lines above the DS entry.

it may default as Dj$w.foo.com. but you can change it to Dj$w. But you might have to add an alias with a period at the end in your /etc/hosts file. i.e.

11.11.11.11. localhost localhost.

Rusty Sapper

Re: sendmail

Shannon Petry — Wed, 01 Aug 2001 15:48:46 GMT

I think the more proper way of doing this is to modify an entry in "/etc/rc.config.d/mailsvrs" which says "MAIL_SERVER=" to "MAIL_SERVER={your mail server}" and then stop and start sendmail. This should then forward all mail to that server without modifying macros. The rc.config.d files are not messed with at upgrade, where sendmail.cf may be replaced with a patch upgrading sendmail!

Regards,
Shannon