topic STACK IMPLIMENTATION in Operating System - HP-UX

STACK IMPLIMENTATION

Sudheer Kumar — Tue, 31 Jul 2001 21:56:48 GMT

Hi,
I am porting GDB to HP-UX.It required some information.the following instructions are required to grow user stack.
On the SPARC,
st %o0, [%sp]
ta %icc, 1
nop
nop
ON the INTEL
movl 0,(%esp)
int3
My question is, what are the instructions for HP-UX plotform.

Your help is urgently required.
Thanks
Sudheer

Re: STACK IMPLIMENTATION

Vincent Fleming — Thu, 02 Aug 2001 13:16:28 GMT

Isn't there a ported version at www.gnu.org?

Re: STACK IMPLIMENTATION

Vic Parker — Thu, 02 Aug 2001 15:33:41 GMT

I cannot answer your question but, I have not had a problem compiling GNU tools on HP-UX. I would insure that the configure has selected the correct OS and version for compilation. I would also maybe use gcc to compile GNU software inplace of the HP ANSI C compiler.

To use the HP compiler go to the HP Porting and Software Archieve. There are serveral around the world the last time I downloaded source I used: hpus.connect.org.uk

My $0.02,

Vic

Re: STACK IMPLIMENTATION

Sudheer Kumar — Sun, 05 Aug 2001 20:43:10 GMT

Hi Vic,
While i was opening this page, hpus.connect.org.uk
it is givign the site not found is coming. can you pls tell me from which can download the porting problems and solutions.

-Sudheer

Re: STACK IMPLIMENTATION

Patrick Wallek — Mon, 06 Aug 2001 00:50:23 GMT

Try this:

http://hpux.connect.org.uk/hppd/hpux/Gnu/gdb-5.0/

Re: STACK IMPLIMENTATION

Vic Parker — Wed, 08 Aug 2001 13:44:03 GMT

Opps! fat fingers I guess. Thanks for the cover Pat.