topic Re: must /usr reside on vg00 in Operating System - HP-UX

must /usr reside on vg00

Rainer von Bongartz — Tue, 07 Aug 2001 08:23:47 GMT

Just a quick question

must /usr reside on /dev/vg00 or can I mount a logical volume on /dev/vg01 as /usr ??

Re: must /usr reside on vg00

JACQUET — Tue, 07 Aug 2001 08:34:58 GMT

Hello,

I guess you can put /usr to another VG than vg00, for sure in Single User Mode. Concerning the multi-user mode, i know that the system is doing a vgchange from all VG before starting rc scripts, but it has to be tested according to me, to be sure than no troubles will happen
regards

PJA.

Re: must /usr reside on vg00

Alex_17 — Tue, 07 Aug 2001 08:49:17 GMT

Hi rainer,

/usr must not reside on vg00. You can mount it on any non-root volume group.
For example, when you use make_recovery -A, the recovery tape will include data from root volume group plus data from any non-root volume group containing /usr. You can find this in Ignite manual or man make_recovery.

Alex.

Re: must /usr reside on vg00

Thierry Poels_1 — Tue, 07 Aug 2001 09:20:39 GMT

hi,

/usr does not have to reside on /dev/vg00.
Only /stand, /etc, /dev, /sbin and / have to reside on /dev/vg00.
Be carefull when moving to another disk, many utilities like fbackup, cpio, tar reside on /usr!! tar has an equivalent on /sbin however.
good luck,
Thierry.

Re: must /usr reside on vg00

Joseph C. Denman — Tue, 07 Aug 2001 12:09:46 GMT

No, /usr can reside on any vg. I have /usr in vg01 on many of my systems.

...jcd...

Re: must /usr reside on vg00

Wodisch — Tue, 07 Aug 2001 16:09:55 GMT

Hello Rainer,

having "/usr" on another VG is all well, you just have
to remember, when you are in single-user mode, you
will have to "vgchange -a y /dev/vgXX" before you do
the "mount -a" to mount "/usr" (to use "vi"?).

HTH,
Wodisch

Re: must /usr reside on vg00

Isaac_4 — Wed, 08 Aug 2001 13:47:06 GMT

the first step is make a new file system with some diferent name example: /usr1 after that copy all the /usr information on /usr1 and you can use the comand :
#cd /usr
pwd
#/usr

find . |cpio -pdu /usr1
with this command you can copy all the data with all the permisions and the all configuration included the subdirectories.

2 step shutdown the system in single user mode with the following step

shutdown --> to shutdown the system in single user mode
- # vgchange -a -y vg00
- modify the fstab and change the new path for /usr to vg01/usr
note:you can modify the fstab and made change before shutdown