topic Re: error !when i made a make_recovery in Operating System - HP-UX

error !when i made a make_recovery

Rambo_1 — Fri, 15 Nov 2002 09:01:48 GMT

when i did a make_recovery -Av I met following error messages
*********************

RROR: Fileset: "Ignite-UX.FILE-SRV-10-20" (rev=B.2.4.307) is a different
version than the rest of Ignite-UX (rev=B.3.8.201). You must
update all filesets of the product to the same version for
proper behavior.
ERROR: Fileset: "Ignite-UX.FILE-SRV-11-00" (rev=B.2.4.307) is a different
version than the rest of Ignite-UX (rev=B.3.8.201). You must
update all filesets of the product to the same version for
proper behavior.
*************
if i need to install some patches ? and which patches should i get ?where to get !

Re: error !when i made a make_recovery

Stefan Farrelly — Fri, 15 Nov 2002 09:04:17 GMT

Your ignite installation is screwed up. Usually caused by having different versions of ignite in a depot you installed from or already having an old version of ignite installed then installing a new version on top of it. The solution is;

1. swremove Ignite (all versions)
2. confirm using swlist -l bundle that you have no more ignite filesets installed.
3. install Ignite again (if you do this from a depot be careful the depot only has one version of ignite in it. If not sure download and install from a .depot file)

Then you will be fine.

Re: error !when i made a make_recovery

Bill McNAMARA_1 — Fri, 15 Nov 2002 09:12:34 GMT

as Steven mentions, you should remove and reinstall ignite. You can get the latest from http://software.hp.com/products/IUX/

Later,
Bill

Re: error !when i made a make_recovery

T G Manikandan — Fri, 15 Nov 2002 09:16:51 GMT

As the messages clearly indicate that different versions of ignite are there on your machine.

It is better that you remove all ignite filesets from the server and reload the latest version

Thanks