topic Service Control Manager, error when adding a client in Operating System - HP-UX

Service Control Manager, error when adding a client

Maurice Peterse — Tue, 29 Jan 2002 11:23:12 GMT

When i do a
mxnode -a name.test.com
i get the error:
The following file for the following node does not exist: name.test.com
Please refer to the Technical Reference Manual...

I've installed the agent on the machine and i already have 2 other machines running "under" the SCM

any ideas?

Re: Service Control Manager, error when adding a client

eran maor — Tue, 29 Jan 2002 11:26:02 GMT

Hi

i would check the /etc/hosts file .

i think it shuold be like this in the name of the host is argon :
15.188.125.205 argon.israel.hp.com argon

add this to the /etc/hosts of the server and to the client

Re: Service Control Manager, error when adding a client

Maurice Peterse — Tue, 29 Jan 2002 12:57:25 GMT

I've tried
ip - name.domain.com alias
on both the /etc/hosts of the server and noce
and ive tried
ip - alias name.domain.com

still the same error....

Re: Service Control Manager, error when adding a client

Bill McNAMARA_1 — Tue, 29 Jan 2002 13:13:35 GMT

did you run mxsetup on the node..

I recall problems with SCM check out my troubleshooting....

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xfed515009d30d5118fef0090279cd0f9,00.html

Re: Service Control Manager, error when adding a client

Maurice Peterse — Tue, 29 Jan 2002 13:42:37 GMT

It's not the server that's giving the problem i think..
cause the other nodes are working perfectly...