topic Re: python 2.2.1 install on hp-ux 11.11 in Operating System - HP-UX

python 2.2.1 install on hp-ux 11.11

Mike_Ca Li — Thu, 08 May 2003 15:45:19 GMT

Hi:
I followed the instructions for the install on hp-ux 11.00 from the link below
http://bizforums.itrc.hp.com/cm/QuestionAnswer/0,,0x02275bd3782dd711abdc0090277a778c,00.html
I did:
swinstall -s /apps2
I get the following error:
There is currently no depot software on host "server" at location "/apps2". Make sure that an absolute pathname is specified for ???????? ??
???? ?? location (beginning with "/").

The default source "/apps2" does not exist or is not a valid source ???? ??
?????????? and there are no other registered depots on server. You can type ???????? ??
???? ?? in the depot path on this host or choose a different host.

server:/apps2 {197}> ls
archive python-2.2.1
backup python-2.2.1-sd-11.00.depot
lost+found python-2.2.1-sd-11.20.depot

Re: python 2.2.1 install on hp-ux 11.11

Umapathy S — Thu, 08 May 2003 15:55:06 GMT

Give the full path of the file after swinstall -s

HTH
Umapathy

Re: python 2.2.1 install on hp-ux 11.11

Mark Greene_1 — Thu, 08 May 2003 19:46:29 GMT

Try this:

swinstall -s /apps2/python-2.2.1-sd-11.00.depot

This assumes all of your defaults for swinstall are correct for you environment. Man swinstall for more info.

HTH
mark

Re: python 2.2.1 install on hp-ux 11.11

Mike_Ca Li — Fri, 09 May 2003 17:45:29 GMT

I am using swinstall -s /apps2/python-2.2.1-sd-11.00.depot
What else am I missing? Thanks.
"server:/apps2/python-2.2.1-sd-11.00.depot": You do not have the ?? ??
???????? required permissions to perform this operation. Check permissions ??????????
?? ?? using the "swacl" command or see your system administrator for ?? ??
???????? assistance. Or, to manage applications designed and packaged for ?????? ??
???? ?? nonprivileged mode, see the "run_as_superuser" option in the "sd" man ?? ^ ??
???? ?? page.

Re: python 2.2.1 install on hp-ux 11.11

T G Manikandan — Sat, 10 May 2003 06:04:25 GMT

Do the installation using root.

Still you face the same problem rebounce your swagentd

#/usr/sbin/swagentd -r

Thanks