topic Re: Oracle Open Cursor in Operating System - HP-UX

Oracle Open Cursor

Sylvie Vezina — Tue, 25 Mar 2003 16:23:02 GMT

I have an installation of oracle 8.0.6 (32bits) on hp/ux 11 (64bits) for their Oracle instance.

I have to transfer my database from one server to a newer and I am getting an error over max_open_cursors exeeded even with the same ini parameters as on old server. I am getting this when starting screening jobs in lab loader. The init file is setup for 600 open cursors

I will appreciate any information you may have.

Re: Oracle Open Cursor

Yogeeraj_1 — Tue, 25 Mar 2003 17:33:11 GMT

hello,

A number of 500 or 1,000
is more reasonable value for max_open_cursors.

cursors live for the life of a database session or until you close them.

Suggest that you increase the limit further to 1000. After that, if you still have issues, look at v$open_cursor as your session is running
to see what cursors are sticking around that you feel should not be (plsql is
going to cache some so you would be looking for NON-plsql based cursors in
there)

hope this helps!

Best Regards
Yogeeraj

Re: Oracle Open Cursor

Indira Aramandla — Wed, 26 Mar 2003 06:51:29 GMT

Yes as Yogeeraj said open CURSORS are active until you close them. Increase the OPEN_CURSORS parameter in the init.ora file and hopefully this should be fine.