topic Re: ignite make_recovery single ended to fast/wide disk in Operating System - HP-UX

ignite make_recovery single ended to fast/wide disk

Terry L. Harrington — Wed, 20 Nov 2002 16:02:40 GMT

I have made a make recovery tape on a 735 workstation where the boot disk was a single
ended disk. I am attempting replace the boot
disk with a fast/wide disk. The ignite boot tape will not recognize the fast/wide as an IO
device. The initial server search for IO devices shows that it is installed.

Re: ignite make_recovery single ended to fast/wide disk

harry d brown jr — Wed, 20 Nov 2002 16:17:52 GMT

What version of ignite are you running? You might need the newer version.

live free or die
harry

Re: ignite make_recovery single ended to fast/wide disk

RAC_1 — Wed, 20 Nov 2002 16:36:33 GMT

I think the difference with disks should be a problem.

But use the latest Ignite.

Re: ignite make_recovery single ended to fast/wide disk

Terry L. Harrington — Thu, 21 Nov 2002 18:03:13 GMT

The ignite version that I am using is A.2.3.205
I have been told that any version after 3 will
not work on a 735.