topic Re: Workstation in Operating System - HP-UX

Workstation

Manoj Misra — Thu, 12 Sep 2002 06:26:13 GMT

Hi All,

Currently we are using "HP Entria II High Res NetStation" as x-terminal with HP-UX V10.20. Cam we use same work station with HP-UX 11.0. ??

Regards
Manoj

Re: Workstation

Bill McNAMARA_1 — Thu, 12 Sep 2002 06:46:21 GMT

yes, there's no problem.
However, you will need to update your configuration files and reinstall Enware2 software for HP-UX 11.

You config files /in /etc/opt/hpxt/enware2/xthome/config can be tar'd and copied from the 10.20 system to the 11.00 system, however, the ServerRoot etc will need to be changed (If your system changes name/ip)

In either case, you will need to install 9.11 or 9.12 base and patch to the latest Xterm PL FOR 11.0. Otherwise some peer clients will not work.

Later,
Bill

Re: Workstation

Bill McNAMARA_1 — Thu, 12 Sep 2002 06:52:54 GMT

latest 9.11 patch for HP-UX 11:

http://support4.itrc.hp.com/service/patch/patchDetail.do?patchid=PHSS_23024&context=hpux:800:11:00

latest 9.12 patch for 11.00:

http://support4.itrc.hp.com/service/patch/patchDetail.do?patchid=PHSS_23022&context=hpux:800:11:00

Re: Workstation

Alex Glennie — Thu, 12 Sep 2002 07:13:06 GMT

fyi both revisions of enware s/w 7.## and 9.## are supported to be installed on 10.20 & 11.00 but NOT 11.11.

As to the O/S and support of the systems you XDMCP connext to it doesn't matter but you will have to ensure at least one system remains on your network at either 10.20 or 11.00 so the xterminals can download their code from it.