topic Re: IOSCAN vs SAM in Operating System - HP-UX

IOSCAN vs SAM

Olebile — Tue, 26 Nov 2002 13:17:33 GMT

Gentlemen,

I have just installed HP-UX11 with the June 2002 bundles on a K580 HP9000 server attached to an XP256. I have two links on the XP from the server. The XP disks on one path 8/8 are visible thru SAM and IOSCAN. The XP disks on the other channel 12/12 are not visible thru SAM but I can see them on IOSCAN output. I have ran "insf -eH", I have unplugged the 12/12 connector and run "ioscan -fnH 12/12" and to my suprise ioscan can still see them.

Please help...........

Re: IOSCAN vs SAM

Armin Feller — Tue, 26 Nov 2002 13:21:24 GMT

Hi,

run "rmsf -R" to the hw-path, maybe that removes the XP from "ioscan" on this path.

Regards,
Armin

Re: IOSCAN vs SAM

justin berkman — Tue, 26 Nov 2002 14:06:47 GMT

hi guys

remove the special file
and reinstall the special file..

remove :
rmsf special_file

install
insf -e special_file

Re: IOSCAN vs SAM

Sanjay_6 — Tue, 26 Nov 2002 15:20:00 GMT

Hi,

Try this link,

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000064900677

The doc id is KBRC00008326.

Hope this helps.

Regds