topic Re: Patch installation problems in Operating System - HP-UX

Patch installation problems

Carter Jay — Wed, 28 Aug 2002 06:44:28 GMT

Hello,

I've just installed patch PHCO_25424 with dep, with automated package created with create_depot_hp-ux_11, and I've got an error message at startup and have to look in /etc/rc.log (included file). I notice some errors (swap start...).
When i try to launch the "last "command, i've got the error message:
# last
Memory fault(coredump)

Thanks in advance for your help

Regards

Jerome

Re: Patch installation problems

Dirk Wiedemann — Wed, 28 Aug 2002 06:57:26 GMT

Hello Jerome

in your log there is another error.
while configuring all unconfigured software filesets
the system couldn't remove the follow:
Obsolete.NCSNCK,l=/,r=B.11.00,a=HP-UX_B.11.00_32/64,v=HP,fa=HP-UX_B.11.00_32/64

check this file:
/var/adm/sw/needs_remove
you can try to remove it manual and see what happened.

Dirk

Re: Patch installation problems

James R. Ferguson — Wed, 28 Aug 2002 09:44:33 GMT

Hi Jerome:

The error for swap activation is due to the fact that you have added an entry (/dev/vg00/lvol2) for primary swap to '/etc/fstab'. Remove this entry. Primary swap was enabled during the execution of 'S100localmount' and then (as it should have been) during 'S500swap_start start'.

As for the 'last' abort (coredump). Your '/var/adm/wtmp' file is probably corrupt. Create a new empty file to repair the error:

# /dev/null > /var/adm/wtmp

Regards!

...JRF...