topic Error with lsof-4.64 in Operating System - HP-UX

Error with lsof-4.64

Blanca Hembre — Wed, 04 Sep 2002 06:29:55 GMT

Hello,

I just installed lsof-4.64 on HP-UX 11.0, but when I try to run it I get the following error:

lsof: can't read proc table info

Does anybody knows what it is happening?, I restartet the server because I changed the kernel but it did not work either.

Any help would be appreciated, I had tried to find information about this error on the Internet but it is not much or it refers to Solaris.

Thanks in advance,
Blanca

Re: Error with lsof-4.64

Dirk Wiedemann — Wed, 04 Sep 2002 06:34:48 GMT

Hello Blanca,
did you install the 32-bit or 64-bit version of lsof-4.64?
regards
Dirk

Re: Error with lsof-4.64

Blanca Hembre — Wed, 04 Sep 2002 07:02:24 GMT

Hi,

I'm not sure if it is the 32-bit or 64-bit version, I download it from http://hpux.cs.utah.edu/hppd/hpux/Sysadmin/lsof-4.64/lsof-4.64-ss-11.00.tar.gz
and I don't find it in the documentation. How could I see this?

Regards,
Blanca

Re: Error with lsof-4.64

Alex Glennie — Wed, 04 Sep 2002 07:09:47 GMT

see http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xee1a6049dbb6d611abdb0090277a778c,00.html

I agree I think the error is down to the version of lsof vs O/S

Re: Error with lsof-4.64

Stefan Schulz — Wed, 04 Sep 2002 07:23:32 GMT

Hi,

as far as i know the binaries at the porting centre are 32Bit if not otherwise statet.

You could also check with: file lsof. This should show 32 or 64 Bit version.

So you need to get the 64Bit Version for HP-UX 11.0. Take care, there are also 64Bit version for 11i around.

The thread Alex posted above should provide you with all necessary links.

Hope this helps

Regards Stefan

Re: Error with lsof-4.64

Trond Haugen — Wed, 04 Sep 2002 07:24:26 GMT

I ran into the same problem as the binary is 32 bits and my kernel is 64.

Regards,
Trond

Re: Error with lsof-4.64

Blanca Hembre — Wed, 04 Sep 2002 07:45:03 GMT

Hi,

Then I had to get the 64-bit version, so I checked the link provided by Alex but two of the successives links takes me to the file I already got and the last one is for HP 11.11.

The comand 'file lsof' shows the following, for the lsof I installed:

lsof: PA-RISC1.1 shared executable dynamically linked -not stripped

So does anybody knows where could I get the 64-bit version?

Thanks to all,
Blanca

Re: Error with lsof-4.64

H.Merijn Brand (procura — Wed, 04 Sep 2002 07:52:55 GMT

The 64bit version for 11.00 is ftp://vic.cc.purdue.edu/pub/tools/unix/lsof/binaries/hpux/B.11.00/vxfs/64/9000_800/lsof_4.64.gz

Start browsing at ftp://vic.cc.purdue.edu/pub/tools/unix/lsof/binaries/hpux/B.11.11 to see if there is a specific 1.11 64bit version too

Re: Error with lsof-4.64

Stefan Schulz — Wed, 04 Sep 2002 07:58:40 GMT

Hi again,

search the forum. I remember that there has been a thread only two or three days ago. There was a 64Bit version of lsof attached as shar (shell archive) file attached.

The thread had something to do with which program is listening on an open port.

Hope this helps

Regards Stefan

Re: Error with lsof-4.64

Blanca Hembre — Wed, 04 Sep 2002 08:06:19 GMT

Hi,

Thanks to all, I checked the forum again and downloaded it from http://hpux.cs.utah.edu/hppd/hpux/Sysadmin/lsof-4.64/ and it works!

Thanks a lot again,
Blanca

Re: Error with lsof-4.64

Todd McDaniel_1 — Thu, 05 Sep 2002 19:00:55 GMT

[B]11.i version of lsof[/B]

I know yall have already helped Blanca, but here is a version that will work on 11.i

I got a copy of the binary from
http://ftp.cerias.purdue.edu/pub/tools/unix/sysutils/lsof/binaries/hpux/B.11.11/

I downloaded the lsof_4.63.gz file to chd12 and then gunzip'ed it. It seems to run okay.

My brain is your brain.