topic Re: Device in Operating System - HP-UX

Device

Tiago Marques_2 — Fri, 07 Jun 2002 13:51:11 GMT

Hi!

I need run this command:
/opt/fcms/bin/fcmsutil enable

But I don't know the device_file name, I just have the adapter hardware path (0/4/0/0).

How do I discover the device file, using hardware path??

Thanks!

Re: Device

Steven Sim Kok Leong — Fri, 07 Jun 2002 13:53:10 GMT

Hi,

# ioscan -fnH 0/4/0/0

Hope this helps. Regards.

Steven Sim Kok Leong

Re: Device

Helen French — Fri, 07 Jun 2002 13:55:19 GMT

Use this command:

# ioscan -fnH 0/4/0/0

# man ioscan (for details)

Re: Device

zhaogui — Mon, 10 Jun 2002 05:34:42 GMT

fcmsutil can only run on Fibre Channel Mass Storage Adapter devices, so you can run "ioscan -k -fnC fc" to identify all the FC devices, usually they are called "/dev/td?", then you can run fcmsutil on them.

Cheers,

Re: Device

zhaogui — Mon, 10 Jun 2002 05:38:35 GMT

I ignored one case, you should also run "ioscan -k -fnC lan" to find out other possible FC cards because sometimes they may fall under lan Class.