topic Change screen resolution in Operating System - HP-UX

Change screen resolution

kuotaiyi_2 — Tue, 24 Dec 2002 13:17:32 GMT

May(How can) I change my screen resolution?

I use hpux10.20 with CDE, and fx2 graphic card.

I try to using SAM to find somewhere to setting screen resolution, but.....

Thanks

Re: Change screen resolution

eran maor — Tue, 24 Dec 2002 13:34:25 GMT

Hi

please take a look on this answer :

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x20517bb04b5cd611abdb0090277a778c,00.html

Re: Change screen resolution

John Bolene — Tue, 24 Dec 2002 14:09:32 GMT

in SAM look under display, X server config, graphics

Ny card can only do 1024X768

Re: Change screen resolution

Robert-Jan Goossens — Tue, 24 Dec 2002 14:13:10 GMT

Hi,

You can use setmon to change the resolution/refresh settings of the monitor.

/opt/graphics/common/bin/setmon

Kind regards,

Robert-Jan.

Re: Change screen resolution

Jeff Schussele — Tue, 24 Dec 2002 16:12:09 GMT

Hi,

If this is a 700 series workstation, you can also toggle the resolutions pre-boot by using the TAB key.
Believe this function only toggles through the available resolutions of the card - so there can be no doubt whether the res is supported or not.

Season's Greetings,
Jeff

Re: Change screen resolution

John Bolene — Tue, 24 Dec 2002 17:31:15 GMT

Found it and finally got my res to 1280X1024

boot your machine if it is a 700, I have a C110

hit a key to interrupt the boot

go into co (configuration)

type mo to display current monitor config

type mo graphics3 or whatever slot your card is in

I set mine to 1 which was 1280X1024 72 Hz

got mine to work anyway

Re: Change screen resolution

kuotaiyi_2 — Fri, 27 Dec 2002 02:54:48 GMT

Thank for John Bolene

I check my machine during pre-boot.

My just have one resolution which is 1280x1024, with 3 frequency 64,72, and 75.

So, I cannot reduce my display resolution.

Thanks