topic Re: EMS question? in Operating System - HP-UX

EMS question?

Diego_19 — Thu, 26 Dec 2002 20:57:07 GMT

I have installed EMS
EMS-Config A.03.20 EMS Config
EMS-Core A.03.20 EMS Core Product
EMS-KRMonitor A.11.00.04 EMS Kernel Resource Monitor

I do set_fided -l show me this error
set_fixed: Cannot list resources in DOWN state due to problems accessing or reading the PSM Resource Data File /var/stm/data/psm_data.

Re: EMS question?

Patrick Wallek — Thu, 26 Dec 2002 21:09:25 GMT

Check out TKB document ID KBRC00010140.

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000065556768

Re: EMS question?

Diego_19 — Fri, 27 Dec 2002 12:30:20 GMT

I couldn't download, please can you send me to hurtado73@hotmail.com
Thnaks

Re: EMS question?

steven Burgess_2 — Fri, 27 Dec 2002 12:41:05 GMT

Diego

I have mailed this to you

Regards

Steve

Re: EMS question?

Pete Randall — Fri, 27 Dec 2002 12:42:17 GMT

Here, try this attachment (which I hope will work).

Pete

Re: EMS question?

Pete Randall — Fri, 27 Dec 2002 12:45:58 GMT

Well, depending on your browser, the attachment may or may not work. Hopefully, Steven's e-mail will take care of it for you.

Pete

Re: EMS question?

Paul Szeto — Wed, 19 Feb 2003 20:36:17 GMT

Hello,

The solution from the linked document did not work for me because EMS could not be disabled from monconfig (as recommended in step 1 of the solution)

I got some errors flashed momentarily on the screen after I selected "Kill" EMS from monconfig.

Actually I thought this WAS the problem to be resolved at the first place (EMS could not be stopped or got to work because psm_data file is inaccessible).

Please advice

Thanks,
PS