topic Re: fbackup to HP Ultrium in Operating System - HP-UX

fbackup to HP Ultrium

Vinesh Dhevcharran — Tue, 31 Dec 2002 07:38:26 GMT

Hi,

We have just installed an HP ultrium.
I can backup using tar but when I use fbackup via. SAM I get the following:
Starting interactive backup...
br_backup: Invoking fbackup. See /var/sam/log/br_log for details.
fbackup(1421): no history is available for graph file /etc/sam/br/graphTCAa23531
(below level 0)
fbackup(1004): session begins on Tue Dec 31 09:36:55 2002
fbackup(3038): output file /dev/rmt/c9t3d0BEST is not a valid device file for ba
ckup
fbackup(3019): would you like to enter a new output file?
n
fbackup(3022): would you like to continue this session?
n
fbackup(3004): writer aborting
fbackup(1002): Backup did not complete : Reader or Writer process exit

Press to continue sam...

Any ideas as to what the problem is?

Many thanks

Vinesh

Re: fbackup to HP Ultrium

U.SivaKumar_2 — Tue, 31 Dec 2002 07:43:43 GMT

Hi,

For fbackup or frecover to support ultrium you have load this patch for HP-UX 10.20 PHCO_23861. The patch for 11.0 is PHCO_23854

regards,
U.SivaKumar

Re: fbackup to HP Ultrium

T G Manikandan — Tue, 31 Dec 2002 08:03:05 GMT

For ultrium tape drive support

you need to have

hpux11.11
PHCO_23914

hpux 11.0
PHCO_25424

hpux 10.20
PHCO_23861

Thanks