https://community.hpe.com/t5/backoffice-products/windows-2000-cluster/m-p/2515679#M183 I have recently upgrade a cluster server from NT 4.0 to W2K. I got one node of the cluster working. The problem I am having is with the second node. Right after the Netraid cards recognize the drives on the shared device and right before W2K starts, I get a I/O error. With this error, the second node does not recogonize the drives configured on the Shared device. Here is how the cluster is configured:<BR /><BR />LH II servers (dual processors)<BR />HP Netraid cards to the shared device <BR />NetServer Storage System/6<BR /><BR />I had this set up working with Windows NT 4.0<BR /><BR />Any suggestions on what I should look at first to get the second Node to recognize the drives on the shared device? Tue, 10 Apr 2001 15:34:47 GMT William Topa 2001-04-10T15:34:47Z https://community.hpe.com/t5/backoffice-products/windows-2000-cluster/m-p/2515679#M183 I have recently upgrade a cluster server from NT 4.0 to W2K. I got one node of the cluster working. The problem I am having is with the second node. Right after the Netraid cards recognize the drives on the shared device and right before W2K starts, I get a I/O error. With this error, the second node does not recogonize the drives configured on the Shared device. Here is how the cluster is configured:<BR /><BR />LH II servers (dual processors)<BR />HP Netraid cards to the shared device <BR />NetServer Storage System/6<BR /><BR />I had this set up working with Windows NT 4.0<BR /><BR />Any suggestions on what I should look at first to get the second Node to recognize the drives on the shared device? Tue, 10 Apr 2001 15:34:47 GMT https://community.hpe.com/t5/backoffice-products/windows-2000-cluster/m-p/2515679#M183 William Topa 2001-04-10T15:34:47Z https://community.hpe.com/t5/backoffice-products/windows-2000-cluster/m-p/2515680#M184 Hello,<BR /><BR />which NetRaid-Controller do you use? What is the driver-version for this IF? <BR /><BR />At first check, if you can syncronize the Disks without Cluster. Disable Cluster-Services and start only one System at the same time. <BR /><BR />Best regards<BR /><BR /><BR />Stephan Fri, 10 May 2002 07:17:09 GMT https://community.hpe.com/t5/backoffice-products/windows-2000-cluster/m-p/2515680#M184 Stephan Hermanowski 2002-05-10T07:17:09Z