topic Re: Linux MIBs in Operating System - Linux

Linux MIBs

Ng King Wang — Sat, 05 Jan 2002 13:32:13 GMT

Good evening all,

I installed RPM Package (ucd-snmp) on ReHat Linux. Also, snmpd service is started.

I only get the information of system description by using NNM. However, I cannot collect interface utilization information.

How can I get MIBs for monitoring the interface utilization of RedHat Linux?

Also, how can I check the name of SNMP agent I am using? Thanks in advance. :)

Re: Linux MIBs

Tee How Long — Mon, 07 Jan 2002 02:43:45 GMT

Look for MRTG.

http://people.ee.ethz.ch/~oetiker/webtools/mrtg/

Re: Linux MIBs

Erich Huebner_1 — Thu, 10 Jan 2002 14:53:41 GMT

Hello,
All of you snmpd configuration is located in /etc/snmp/snmpd.conf. You have to modify the configuration for it it work correctly.

Good luck

Re: Linux MIBs

Eugen Cocalea — Fri, 11 Jan 2002 11:14:01 GMT

Hi,

use snmpwalk:

snmpwalk interfaces

That will show you the interfaces MIBs -> counters, ticks, etc.

do a 'man snmp.conf' for infos about how to set up snmp.

E.

Re: Linux MIBs

Ng King Wang — Sat, 12 Jan 2002 05:55:34 GMT

Thank you all,

I can get standard MIBs for monitoring Linux's interface after installing ucd-snmp RPM package.

I would like to find a site that provides Linux MIBs. Any idea or suggestion?

Go ahead :)