topic Re: ioscan on Linux in Operating System - Linux

ioscan on Linux

Karthik S S — Mon, 08 Mar 2004 07:42:17 GMT

Is there a ioscan equivalent available for Linux?? (I am not looking for lspci or cat /proc/devices).

Thanks,
Karthik S S

Re: ioscan on Linux

Mark Grant — Mon, 08 Mar 2004 07:45:16 GMT

No.

However, you can ... oh, you don't want that.

On the other hand, KDE has a rather funky information center that shows you all the hardware and information about it and I'm sure gnome does too. Don't expect to find any hardware paths though.

I might add that /proc is an extremely good interface into the kernel it is equivalent to "ioscan -fk"

Re: ioscan on Linux

Steven E. Protter — Mon, 08 Mar 2004 07:59:41 GMT

If there is going to be ioscan on Linux someone is going to have to write it.

If I were silly enough to bang my head on that one I'd be forced due to OS limitations to use the tools mentioned above as the underlying methodology for getting the hardware information.

Most distributions do come with a pretty decent gui point and click hardware tool now.

SEP

Re: ioscan on Linux

Paul Cross_1 — Mon, 08 Mar 2004 15:23:48 GMT

It is amazing how often this question comes up..! If you are looking for the equiv to the HP/UX ioscan for linux it doesn't exist. however, there are lots of tools that do roughly the same thing. As I have mentioned before, hwinfo works very well, it is a suse only tool however. I'm sure RH has equivalents.

Re: ioscan on Linux

Tim Sanko — Mon, 08 Mar 2004 16:13:51 GMT

Karth,

Tools exist to show you what exists. I don't believe that there are tools that work with the kernels to configure devices yet.

Tim

Re: ioscan on Linux

Martin P.J. Zinser — Mon, 08 Mar 2004 17:34:39 GMT

Hello Karthik,

howabout lshw at

http://ezix.sourceforge.net/software/lshw.html

This has an "ioscan like" output.

Greetings, Martin

Re: ioscan on Linux

Karthik S S — Mon, 08 Mar 2004 23:41:35 GMT

make returns the following error upon compilation of lshw and exits ,

c++ -g -Wall -c options.cc -o options.o
c++ -g -Wall -c lshw.cc -o lshw.o
c++ -g -Wall -c usb.cc -o usb.o
usb.cc: In function `string BCDversion (short unsigned int)':
usb.cc:216: `snprintf' undeclared (first use this function)
usb.cc:216: (Each undeclared identifier is reported only once for each
function it appears in.)
make: *** [usb.o] Error 1
[root@linux2 lshw-A.01.06]#

Pl. help.

Thanks,
Karthik S S

Re: ioscan on Linux

Mark Grant — Tue, 09 Mar 2004 01:18:27 GMT

Well, I find this hard to believe but if I were you, I'd have a look at "usb.cc" and see if it has a "#include " somewhere near the top, or includes another file that does.

Re: ioscan on Linux

Karthik S S — Tue, 09 Mar 2004 01:41:48 GMT

Thanks for the link Martin.

Mark:
You are great. Yes .. that file was missing the following line,

#include

it works great now ..!!!

Thanks again,
Karthik S S

Re: ioscan on Linux

John Meissner — Mon, 05 Apr 2004 13:10:09 GMT

wow... great work. I did a quick search for this and it works great! very good fix with the missing line too guys

Re: ioscan on Linux

Steven E. Protter — Mon, 05 Apr 2004 14:15:51 GMT

Perhaps someone could post source code and/or binaries. I can get Merijn to post it up to his site or put it on my hpux.ws site as a ioscan substitude for Linux.

SEP

Re: ioscan on Linux

Karthik S S — Mon, 05 Apr 2004 23:07:17 GMT

SEP,

That is a good idea. Source code is available at,

http://ezix.sourceforge.net/software/lshw.html

-Karthik S S

Re: ioscan on Linux

Ross Minkov — Mon, 20 Sep 2004 12:15:22 GMT

Some more on this topic...

The kudzu utility maintains a DB of detected and configured hardware, found at /etc/sysconfig/hwconf. As part of the boot process, kudzu compares the currently detected hardware to the stored DB. This comparison can be forced by calling the kudzu command directly. If new hardware is detected, or previousely existing hardware is removed, kudzu will attempt to automatically reconfigure the system, or steer the administrator to the appropriate interactive configuration utility.
Try this:
cat /etc/sysconfig/hwconf

hwbrowser provides a GUI that shows most of the detected hardware.

Tools not in RedHat Linux by default:
scsiadd & the new lshw
They are in Debian Linux

lspci

# lspci -vt
-[00]-+-00.0 Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub
+-01.0-[01]----00.0 nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro]
+-1e.0-[02]----08.0 Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller
+-1f.0 Intel Corp. 82801BA ISA Bridge (LPC)
+-1f.1 Intel Corp. 82801BA IDE U100
+-1f.4 Intel Corp. 82801BA/BAM USB (Hub #2)
\-1f.5 Intel Corp. 82801BA/BAM AC'97 Audio

usbview (GUI)

On RedHat also try dmidecode

HTH,
Ross

Re: ioscan on Linux

Karthik S S — Tue, 21 Sep 2004 10:37:13 GMT

Thank you Ross. That's a good piece of Information. Also for rekindling my memories of a old thread :-)!

-Karthik S S

Re: ioscan on Linux

WSM_1 — Tue, 12 May 2009 11:15:58 GMT

I know this is an old post, but just for the record..

HP created an ioscan for linux about the time this post was created. They were handing it out in a Linux Security training class that was part of a HP Security Seminar.

They provided a link to download it, which is no longer working, but the ioscan worked back then, so you know it can be done with some coding.

I figure since it's not easy to find on the web, that the team didn't want to provide on going support for it.

I also remember something of a disclaimer with it.