topic Re: Scopeux is not active in Operating System - Linux

Scopeux is not active

Harstad — Mon, 22 Mar 2004 04:54:23 GMT

Hi

Trying to start the "mwa", executing ./ovpa start, the scopeux daemon is not active

./ovpa stop
./ovpa start

Still fail. the rest of the daemons are running.

Thanks for your help

--------------------------------------------------------------------------------

Re: Scopeux is not active

Francisco J. Soler — Mon, 22 Mar 2004 05:42:20 GMT

Hi,
There is no enough info to check the problem, could you send more info about the errors?

Meanwhile You can search the following threads in this forum:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=455675
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=408826

Frank.

Re: Scopeux is not active

Harstad — Mon, 22 Mar 2004 05:59:14 GMT

Hi

Firstable for your reply,,

do you know if is there any log file??

Thanks

Re: Scopeux is not active

Harstad — Mon, 22 Mar 2004 06:45:26 GMT

Hi

Seeing the "status.scope" file:

**** /opt/perf/bin/scopeux : 03/22/04 12:20:23 ****
scopeux C.04.00.00 COLLECTOR BEGIN.

**** /opt/perf/bin/scopeux : 03/22/04 12:20:25 ****
ERROR: Incompatible logfile format. (PE221-40)

**** /opt/perf/bin/scopeux : 03/22/04 12:20:25 ****
COLLECTOR END. program terminated abnormally.

ERROR: Unknown rectype: 0

Thanks

Re: Scopeux is not active

Francisco J. Soler — Tue, 23 Mar 2004 03:21:32 GMT

Hi,
I've found this in the manual, perhaps helps you:

Error: Incompatible log file format (PE221-40)

This message may occur if MeasureWare Agent is installed on the same system as the version A.03 PerfView Agent. The log files collected for that version of the PerfView Agent are incompatible with MeasureWare Agent log files. Remove those PerfView Agent log files and restart scopeux.

Frank.