https://community.hpe.com/t5/operating-system-linux/printer-setup-utility-in-osx-and-jetdirect-500x/m-p/3358347#M13608 Hello,<BR /><BR />If CUPS is your printing system, declare your second printer normally (JetDirect 9100), then :<BR /><BR />=&gt; Stop cups daemon : /etc/init.d/cups stop<BR /><BR />=&gt; Edit printer configuration file : /etc/cups/printers.conf<BR /><BR />=&gt; Locate the "DeviceURI" that correspond to your printer, and replace 9100 by 9101 :<BR /><BR />DeviceURI socket://myprinter.myhome.net:9101<BR /><BR />=&gt; Restart cups daemon : /etc/init.d/cups start<BR /><BR />Good luck.<BR /><BR />Kodjo<BR /> Mon, 16 Aug 2004 17:23:03 GMT Kodjo Agbenu 2004-08-16T17:23:03Z https://community.hpe.com/t5/operating-system-linux/printer-setup-utility-in-osx-and-jetdirect-500x/m-p/3358346#M13607 Seems like the answer is in here somewhere. Struggling with the same issues as many of these users. HP 3200M on LPT 1 prints any job sent to the JetDirect IP address.<BR /><BR />Need solution to adding additional printer to LPT2(9101). Deskjet 1220C connected to port 2 using Mac OSX Panther's Printer setup utility which allows print server set-up but doesn't like the IP:Port ID naming convention for some reason. How do you set up a printer this way which will direct the print job to the right port adn printer? Mon, 16 Aug 2004 16:17:19 GMT https://community.hpe.com/t5/operating-system-linux/printer-setup-utility-in-osx-and-jetdirect-500x/m-p/3358346#M13607 Alexander_81 2004-08-16T16:17:19Z https://community.hpe.com/t5/operating-system-linux/printer-setup-utility-in-osx-and-jetdirect-500x/m-p/3358347#M13608 Hello,<BR /><BR />If CUPS is your printing system, declare your second printer normally (JetDirect 9100), then :<BR /><BR />=&gt; Stop cups daemon : /etc/init.d/cups stop<BR /><BR />=&gt; Edit printer configuration file : /etc/cups/printers.conf<BR /><BR />=&gt; Locate the "DeviceURI" that correspond to your printer, and replace 9100 by 9101 :<BR /><BR />DeviceURI socket://myprinter.myhome.net:9101<BR /><BR />=&gt; Restart cups daemon : /etc/init.d/cups start<BR /><BR />Good luck.<BR /><BR />Kodjo<BR /> Mon, 16 Aug 2004 17:23:03 GMT https://community.hpe.com/t5/operating-system-linux/printer-setup-utility-in-osx-and-jetdirect-500x/m-p/3358347#M13608 Kodjo Agbenu 2004-08-16T17:23:03Z