https://community.hpe.com/t5/operating-system-linux/bootable-error/m-p/3451888#M15661 I suggest to boot to rescue mode from install CD and chek your disks topology. Thu, 30 Dec 2004 02:43:19 GMT Vitaly Karasik_1 2004-12-30T02:43:19Z https://community.hpe.com/t5/operating-system-linux/bootable-error/m-p/3451887#M15660 Hi,<BR /><BR /> I have the DL380 G3 proliant and install red hat linux ES2.1. I also just pluged in 2x72GB with Raid 1 via ACU. After X'mas and someone have swap the Harddisk. I cant normal go to linux OS. Keep said no system-disk. After I use ACU to check. The array controller have been change. The Pair of 72 GB harddisk become array A and the 36GB hardidsk become Array B. I deleted the Array A and try to 36 become Array A and after do the reboot still not have same error and cant reach to OS level. Can someone give me a help.<BR /><BR /><BR />regards<BR />Leon Wed, 29 Dec 2004 02:02:47 GMT https://community.hpe.com/t5/operating-system-linux/bootable-error/m-p/3451887#M15660 Leon Shen 2004-12-29T02:02:47Z https://community.hpe.com/t5/operating-system-linux/bootable-error/m-p/3451888#M15661 I suggest to boot to rescue mode from install CD and chek your disks topology. Thu, 30 Dec 2004 02:43:19 GMT https://community.hpe.com/t5/operating-system-linux/bootable-error/m-p/3451888#M15661 Vitaly Karasik_1 2004-12-30T02:43:19Z