https://community.hpe.com/t5/operating-system-linux/fc60-display-under-sam/m-p/2713050#M1573 When I display my FC60 w/6 SC10's fully configured under SAM (All Disks Status)the controller:device numbers do not match up to actual controller:device number as far as location within each SC10 (i.e. under SAM device 6:10 shows up in 3rd slot from left in bottom SC10 whereas actually located at 6th slot from left in bottom SC10).<BR /><BR />Does anyone have any ideas why this is so? If I use the diagram in the HP SureStore E Disk Array FC60 (pg 106) this is correct diagram.<BR /><BR />Thanks in advance.<BR />Joe<BR /> Mon, 29 Apr 2002 13:14:23 GMT Joe Redman 2002-04-29T13:14:23Z https://community.hpe.com/t5/operating-system-linux/fc60-display-under-sam/m-p/2713050#M1573 When I display my FC60 w/6 SC10's fully configured under SAM (All Disks Status)the controller:device numbers do not match up to actual controller:device number as far as location within each SC10 (i.e. under SAM device 6:10 shows up in 3rd slot from left in bottom SC10 whereas actually located at 6th slot from left in bottom SC10).<BR /><BR />Does anyone have any ideas why this is so? If I use the diagram in the HP SureStore E Disk Array FC60 (pg 106) this is correct diagram.<BR /><BR />Thanks in advance.<BR />Joe<BR /> Mon, 29 Apr 2002 13:14:23 GMT https://community.hpe.com/t5/operating-system-linux/fc60-display-under-sam/m-p/2713050#M1573 Joe Redman 2002-04-29T13:14:23Z https://community.hpe.com/t5/operating-system-linux/fc60-display-under-sam/m-p/2713051#M1574 I found out that SAM does not offer a true representation of what a configured FC60 looks like. It is used for reference only. True depiction can be found in the FC60 manual. Tue, 30 Apr 2002 12:31:29 GMT https://community.hpe.com/t5/operating-system-linux/fc60-display-under-sam/m-p/2713051#M1574 Joe Redman 2002-04-30T12:31:29Z