https://community.hpe.com/t5/operating-system-linux/suse-linux-9-0-prof-issue/m-p/3468464#M16007 Hi,At boot prompt (grub), try "failsafe" boot. If it works, then edit /boot/grub/menu.lst and at the end of each line starting with the keyword "kernel", add :acpi=off Good luck.Kodjo Fri, 21 Jan 2005 19:05:37 GMT Kodjo Agbenu 2005-01-21T19:05:37Z https://community.hpe.com/t5/operating-system-linux/suse-linux-9-0-prof-issue/m-p/3468463#M16006 Hello !<BR /><BR />I have installed SuSE 9.0 prof on Intel E7501 (MSI 9138-070 ) HDD's are connected to Intel SRCU42X RAID Controller .<BR />The problem is before installing OS I am able to go to Raid configuration utility by Ctrl + G option but after O.S. installation it does't show ctrl+G option .<BR />Second problem is while shuting down Server it gets hang sometimes and doesn't switch off the server automatically.<BR /><BR />kindly suggest how to rectify this problem<BR /><BR />regds<BR />Dhananjay Fri, 21 Jan 2005 09:26:59 GMT https://community.hpe.com/t5/operating-system-linux/suse-linux-9-0-prof-issue/m-p/3468463#M16006 dhananjay_1 2005-01-21T09:26:59Z https://community.hpe.com/t5/operating-system-linux/suse-linux-9-0-prof-issue/m-p/3468464#M16007 Hi,At boot prompt (grub), try "failsafe" boot. If it works, then edit /boot/grub/menu.lst and at the end of each line starting with the keyword "kernel", add :acpi=off Good luck.Kodjo Fri, 21 Jan 2005 19:05:37 GMT https://community.hpe.com/t5/operating-system-linux/suse-linux-9-0-prof-issue/m-p/3468464#M16007 Kodjo Agbenu 2005-01-21T19:05:37Z