https://community.hpe.com/t5/operating-system-linux/pb-with-hpasm-storage-part/m-p/3499295#M16599 I found from which my problem comes. I use devfs and thus I have<BR />/dev/cciss/c1d0 which is a repertory whereas hpasm wants a device file (which<BR />is in fact /dev/cciss/c1d0/cciss/c1d0).<BR /><BR />Without the sources I do not see how to solve this problem.<BR /><BR /> Tue, 08 Mar 2005 10:48:37 GMT jacquin 2005-03-08T10:48:37Z https://community.hpe.com/t5/operating-system-linux/pb-with-hpasm-storage-part/m-p/3499294#M16598 I have a Proliant DL380 with Smart Array 5i and Smart Array 5300. I use only the 5300 with 6 HD. My OS is Red Hat Entreprise 2.1 and I installed hpasmd 7.2.0 (hpasm-7.2.0b-204.rhel21.i386.rpm)<BR /><BR />I have a monitoring HD problem :<BR /><BR />hpasmd does not detect the withdrawal of a HD (ucd-SNMP is launched, hpasmd is launched with cmahostd, cmapeerd and cmathreshd for the foundation, cmastdeqd, cmaperfd and cmahealthd for the server part, cmaeventd and cmafcad for the storage part)<BR /><BR />I then installed hpacucli (hpacucli-7.20-16.linux.rpm) and when I look at the controller, it finds Smart Array 5i but not Smart Array 5300)<BR /><BR />Somebody with an idea ?<BR /><BR />thank you Mon, 07 Mar 2005 12:10:05 GMT https://community.hpe.com/t5/operating-system-linux/pb-with-hpasm-storage-part/m-p/3499294#M16598 jacquin 2005-03-07T12:10:05Z https://community.hpe.com/t5/operating-system-linux/pb-with-hpasm-storage-part/m-p/3499295#M16599 I found from which my problem comes. I use devfs and thus I have<BR />/dev/cciss/c1d0 which is a repertory whereas hpasm wants a device file (which<BR />is in fact /dev/cciss/c1d0/cciss/c1d0).<BR /><BR />Without the sources I do not see how to solve this problem.<BR /><BR /> Tue, 08 Mar 2005 10:48:37 GMT https://community.hpe.com/t5/operating-system-linux/pb-with-hpasm-storage-part/m-p/3499295#M16599 jacquin 2005-03-08T10:48:37Z