topic RPM in Operating System - Linux

RPM

Fadia Almarei — Tue, 12 Apr 2005 04:52:13 GMT

Dear All
i have installed Redhat enterprise 3 ES,and i want to install the Rpm's needed and register to the network,how to do that.
BR

Re: RPM

Chakravarthi — Tue, 12 Apr 2005 06:26:20 GMT

i guess by default network related rpms will get installed, you could install the network driver? what happens when you run netconfig command and assign ip address?

Re: RPM

Fadia Almarei — Tue, 12 Apr 2005 06:55:13 GMT

i install the system without assigning ip adress then i configure the ip adress i want to register to network but it does not work.

Re: RPM

Chakravarthi — Tue, 12 Apr 2005 07:29:49 GMT

hi,

at the time of installation if it asked for assigning ip address then your network card is detected, else you need to install the drivers.

check which card you have and drivers are loaded or not

Re: RPM

Fadia Almarei — Tue, 12 Apr 2005 07:31:36 GMT

network is OK ,i want the regestration to redhat network

Re: RPM

Stuart Browne — Tue, 12 Apr 2005 07:40:48 GMT

The package of which provides the 'rhnsd' is 'up2date'.

It should be installed by default.

Re: RPM

Fadia Almarei — Tue, 12 Apr 2005 07:43:47 GMT

ok it is found but it does not connect me to the network the server is not registered

Re: RPM

Sergejs Svitnevs — Tue, 12 Apr 2005 07:43:48 GMT

https://rhn.redhat.com/help/client-config/

Regards,
Sergejs

Re: RPM

Chakravarthi — Tue, 12 Apr 2005 08:17:41 GMT

http://www.redhat.com/docs/manuals/RHNetwork/ref-guide/3.6/ch-register.html