topic Re: Bring up a Linux server in Operating System - Linux

Bring up a Linux server

Ian Derringer — Fri, 13 May 2005 09:44:08 GMT

Hi,
I have this Linux RHAS 2.1 fully configured and currently running on my LAN. I need to loan this Linux server to another site with totally different network IP schema. I've changed the IP address, submask, and the DNS settings to theirs (hosts, resolv.conf, fstab, and eth0, ie). But I'm still having trouble getting this server up and I'm seeing all kinds of errors that has to do with the network. Am I missing something else?? Please help!! Thank you in advance

Ian

Re: Bring up a Linux server

Huc_1 — Fri, 13 May 2005 10:00:05 GMT

Check all the files in
/etc/sysconfig/network-scripts/
and also check /etc/sysconfig/iptables

Jean-Pierre Huc

Re: Bring up a Linux server

Nobody's Hero — Fri, 13 May 2005 10:47:45 GMT

could you post the resolv.conf ?

Re: Bring up a Linux server

Gopi Sekar — Fri, 13 May 2005 10:48:39 GMT

how did you change IP address and other information, its more likely that some of the files are not updated.

did you use redhat config tool to do this? if not try redhat-config-network tool which gives options to change all network related settings.

if you are still not comfortable, please post what is the error message you are getting on the system.

Re: Bring up a Linux server

Ian Derringer — Fri, 13 May 2005 13:05:22 GMT

could you post the resolv.conf ?
**************************
nameserver 192.168.x.x
domain xxxx.com
****************************
The server had static IP address. Now, we're just using DHCP instead.

Thanks,
Ian

Re: Bring up a Linux server

Stuart Browne — Fri, 13 May 2005 21:41:14 GMT

If you are using DHCP, then the '/etc/resolv.conf' should be re-created upon getting new network settings.

The only reasons that wouldn't happen would be if the file's permissions are too tight (should be 644), or the option "NOPEERDNS=yes" is in the '/etc/sysconfig/network-scripts/ifcfg-ethX' file.

Re: Bring up a Linux server

Gopi Sekar — Sat, 14 May 2005 03:52:11 GMT

ok if you are now using DHCP, then remove any existing entries from /etc/resolv.conf which might still reflect old server settings.

also check ifconfig output for any error packets or drops, and if possible post it here.

Also check /etc/sysconfig/networking/devices/ifcfg-ethX for BOOTPROTO=dhcp and remove any other static IP address entries

Regards,
Gopi