https://community.hpe.com/t5/operating-system-linux/device-driver-failover/m-p/3547325#M17701 Hi Everyone<BR /><BR />I have an IBM Bladecenter with a number of linux hosts configured with IBM DS4300 storage via the blade center SAN I/O switches.<BR /><BR />The HBA card is a qlogic device with the qla2300 failover driver. <BR /><BR />For both hosts; If a host connection fails whilst the prefered connection is the current connection, the failover takes 1 minute. If the connection fails whilst the alternate connection is the current connection, the failover takes 15 seconds<BR /><BR />Has anyone used the qlogic driver and come across this issue or similar ?<BR /><BR />Thanks in advance<BR /><BR />Steve Wed, 18 May 2005 12:17:31 GMT steven Burgess_2 2005-05-18T12:17:31Z https://community.hpe.com/t5/operating-system-linux/device-driver-failover/m-p/3547325#M17701 Hi Everyone<BR /><BR />I have an IBM Bladecenter with a number of linux hosts configured with IBM DS4300 storage via the blade center SAN I/O switches.<BR /><BR />The HBA card is a qlogic device with the qla2300 failover driver. <BR /><BR />For both hosts; If a host connection fails whilst the prefered connection is the current connection, the failover takes 1 minute. If the connection fails whilst the alternate connection is the current connection, the failover takes 15 seconds<BR /><BR />Has anyone used the qlogic driver and come across this issue or similar ?<BR /><BR />Thanks in advance<BR /><BR />Steve Wed, 18 May 2005 12:17:31 GMT https://community.hpe.com/t5/operating-system-linux/device-driver-failover/m-p/3547325#M17701 steven Burgess_2 2005-05-18T12:17:31Z