https://community.hpe.com/t5/operating-system-linux/fc10-on-red-hat-dl380/m-p/3548209#M17728 Hello Dan,<BR /><BR />To be able to use your FC10 disks, you need :<BR /> * an enclosure that accepts the disk (ex : SC10)<BR /> * a fibre channel HBA supported on Linux (ex : qlogic-based FCA 2214 for HP Proliant)<BR /> * of course some FC cables<BR /><BR />Good lcuk.<BR />Kodjo<BR /> Fri, 20 May 2005 14:46:58 GMT Kodjo Agbenu 2005-05-20T14:46:58Z https://community.hpe.com/t5/operating-system-linux/fc10-on-red-hat-dl380/m-p/3548208#M17727 Greetings, all. As we transition off of our old HP/9000 to Linux on a DL380, we're left with a couple drive trays, one being an FC10. Is there a way to use these trays with Red Hat (AS 3), and if so, what sort of parts do we need (I'm guessing at HBA at least, but do we need a fiber switch and whatnot)?<BR /><BR />Cheers,<BR /><BR />-dd Thu, 19 May 2005 13:36:01 GMT https://community.hpe.com/t5/operating-system-linux/fc10-on-red-hat-dl380/m-p/3548208#M17727 dan dobbs 2005-05-19T13:36:01Z https://community.hpe.com/t5/operating-system-linux/fc10-on-red-hat-dl380/m-p/3548209#M17728 Hello Dan,<BR /><BR />To be able to use your FC10 disks, you need :<BR /> * an enclosure that accepts the disk (ex : SC10)<BR /> * a fibre channel HBA supported on Linux (ex : qlogic-based FCA 2214 for HP Proliant)<BR /> * of course some FC cables<BR /><BR />Good lcuk.<BR />Kodjo<BR /> Fri, 20 May 2005 14:46:58 GMT https://community.hpe.com/t5/operating-system-linux/fc10-on-red-hat-dl380/m-p/3548209#M17728 Kodjo Agbenu 2005-05-20T14:46:58Z