https://community.hpe.com/t5/operating-system-linux/howto-save-iwpriv-settings/m-p/3596160#M19018 I solved the problem with this entry:<BR /><BR />up /sbin/iwpriv ath0 authmode 2<BR /><BR />in /etc/network/interfaces<BR /><BR />greetings<BR />chris Wed, 03 Aug 2005 18:57:19 GMT 'chris' 2005-08-03T18:57:19Z https://community.hpe.com/t5/operating-system-linux/howto-save-iwpriv-settings/m-p/3596159#M19017 hi<BR /><BR />After PC restart I must do each time from the command line following: <BR /><BR />iwpriv ath0 authmode 2<BR /><BR />otherwise my wlan card is not working.<BR /><BR />howto save these settings ?<BR /><BR />I have Debian Sarge &amp; WLAN WG311T from Netgear.<BR /><BR />I've tried to add in /etc/network/interfaces:<BR /><BR />iwconfig ath0 authmode 2<BR /><BR />but still doesn't work. <BR /> Wed, 03 Aug 2005 17:49:23 GMT https://community.hpe.com/t5/operating-system-linux/howto-save-iwpriv-settings/m-p/3596159#M19017 'chris' 2005-08-03T17:49:23Z https://community.hpe.com/t5/operating-system-linux/howto-save-iwpriv-settings/m-p/3596160#M19018 I solved the problem with this entry:<BR /><BR />up /sbin/iwpriv ath0 authmode 2<BR /><BR />in /etc/network/interfaces<BR /><BR />greetings<BR />chris Wed, 03 Aug 2005 18:57:19 GMT https://community.hpe.com/t5/operating-system-linux/howto-save-iwpriv-settings/m-p/3596160#M19018 'chris' 2005-08-03T18:57:19Z