topic Re: iowait in Operating System - Linux

iowait

Tonatiuh — Mon, 22 Aug 2005 09:34:40 GMT

Red Hat Enterprise Linux 3.0

The "top" command shows a column named 'iowait' which has values about 50%. I have seen that the addition of the values of columns 'user','system' and 'iowait', plus the 'idle' is about 100% so that I think this value (of 'iowait') is involved in a performance problem of the overal server.

Can anyone say me more about the meanning of 'iowait' values?

Re: iowait

Gopi Sekar — Mon, 22 Aug 2005 09:57:28 GMT

I believe iowait describes the percentage of cpu resources spent in waiting for IO request to complete (like hard disk reading/writing, IO devices reading/writing etc).

check your harddisk and type of harddisk. this may also come up if you have lesser amount of RAM than required and lot of swapping is happening.

Hope this helps,
Gopi

Re: iowait

Ivan Ferreira — Mon, 22 Aug 2005 10:42:10 GMT

What Gopi said is right, the iowait may indicate an I/O (disks,network) bottleneck.

You should investigate your paging activity and disk access, 50% iowait is high.

A poor tuned application can cause this behaveour.

Re: iowait

Sudeesh — Wed, 24 Aug 2005 04:02:59 GMT

If a particular disk hardware is having issues, that will cause more i/o wait. Use sar -d to identify any disk bottlenecks.

See sar man page or below link for command details.

http://www.computerhope.com/unix/usar.htm

Sudeesh