https://community.hpe.com/t5/operating-system-linux/modification-of-smartarray-configuration-via-linux-cli/m-p/3619284#M19448 <BR />Robert,<BR /><BR />For SmartArray RAID controllers, you'll need cpqacuxe - the Array Configuration Utility XE (ACU-XE) or hpacucli - the HP Command Line Array Configuration Utility, available from the ProLiant Support Pack (PSP) for Linux. <BR /><BR />/usr/sbin/cpqacuxe is the web-based disk configuration utility for HP array controllers. Refer to /opt/compaq/cpqacuxe/README.TXT for detailed documentation. <BR /><BR />/usr/sbin/hpacucli is the HP Command Line Array Configuration Utility. Type /usr/sbin/hpacucli help for a list of valid commands. <BR /><BR /><BR /># /usr/sbin/hpacucli help <BR /><BR /><BR />To enter the ACU CLI console type:<BR /> hpacucli<BR /><BR />Commands can also be executed from outside the<BR />ACU CLI console using the syntax:<BR /> hpacucli <TARGET> <COMMAND> [param[=value]]<BR /><BR />All targets, commands, parameters, and values must be entered in lowercase.<BR />The only exceptions to this are user-specified names, such as chassisname.<BR /><BR /><TARGET> <COMMAND> [param[=value]]<BR /><TARGET> is of format:<BR /> [controller all|slot=#|wwn=#|chassisname="AAA"] [array all|]<BR /> [physicaldrive all|#:#:#|allunassigned] [logicaldrive all|#]<BR /> Note: The first # in physicaldrive is only needed for systems that<BR /> specify port:box:bay. Other physical drive targeting schemes<BR /> are box:bay and port:id.<BR /><BR />Example targets:<BR /> controller all<BR /> controller slot=5<BR /> controller chassisname="Lab C"<BR /> controller serialnumber=P21DA2322S<BR /> controller wwn=500308B300701011<BR /> controller slot=1 array all<BR /> controller slot=7 array A<BR /> ctrl slot=1 pd allunassigned<BR /> controller slot=2 logicaldrive all<BR /> controller slot=5 ld 5<BR /> controller slot=5 physicaldrive 1:5<BR /> controller slot=5 physicaldrive 1E:2:3<BR /><BR /><COMMAND> can be "create","delete","modify","show","rescan"<BR />For detailed command information type any of the following:<BR /> help add<BR /> help create<BR /> help delete<BR /> help modify<BR /> help remove<BR /> help shorthand<BR /> help show<BR /> help target<BR /> help rescan<BR /><BR /><BR /><BR />HTH,<BR />Ross</COMMAND></TARGET></COMMAND></TARGET></COMMAND></TARGET> Tue, 06 Sep 2005 11:29:25 GMT Ross Minkov 2005-09-06T11:29:25Z https://community.hpe.com/t5/operating-system-linux/modification-of-smartarray-configuration-via-linux-cli/m-p/3619283#M19447 Is there a specific configuration utility for the SmartArray in linux?<BR />How can I remove a spare disk from a configured Raid5 set?<BR /><BR />Thanks for any assistance!<BR /><BR />Robert Tue, 06 Sep 2005 03:55:45 GMT https://community.hpe.com/t5/operating-system-linux/modification-of-smartarray-configuration-via-linux-cli/m-p/3619283#M19447 Ritter, Robert 2005-09-06T03:55:45Z https://community.hpe.com/t5/operating-system-linux/modification-of-smartarray-configuration-via-linux-cli/m-p/3619284#M19448 <BR />Robert,<BR /><BR />For SmartArray RAID controllers, you'll need cpqacuxe - the Array Configuration Utility XE (ACU-XE) or hpacucli - the HP Command Line Array Configuration Utility, available from the ProLiant Support Pack (PSP) for Linux. <BR /><BR />/usr/sbin/cpqacuxe is the web-based disk configuration utility for HP array controllers. Refer to /opt/compaq/cpqacuxe/README.TXT for detailed documentation. <BR /><BR />/usr/sbin/hpacucli is the HP Command Line Array Configuration Utility. Type /usr/sbin/hpacucli help for a list of valid commands. <BR /><BR /><BR /># /usr/sbin/hpacucli help <BR /><BR /><BR />To enter the ACU CLI console type:<BR /> hpacucli<BR /><BR />Commands can also be executed from outside the<BR />ACU CLI console using the syntax:<BR /> hpacucli <TARGET> <COMMAND> [param[=value]]<BR /><BR />All targets, commands, parameters, and values must be entered in lowercase.<BR />The only exceptions to this are user-specified names, such as chassisname.<BR /><BR /><TARGET> <COMMAND> [param[=value]]<BR /><TARGET> is of format:<BR /> [controller all|slot=#|wwn=#|chassisname="AAA"] [array all|]<BR /> [physicaldrive all|#:#:#|allunassigned] [logicaldrive all|#]<BR /> Note: The first # in physicaldrive is only needed for systems that<BR /> specify port:box:bay. Other physical drive targeting schemes<BR /> are box:bay and port:id.<BR /><BR />Example targets:<BR /> controller all<BR /> controller slot=5<BR /> controller chassisname="Lab C"<BR /> controller serialnumber=P21DA2322S<BR /> controller wwn=500308B300701011<BR /> controller slot=1 array all<BR /> controller slot=7 array A<BR /> ctrl slot=1 pd allunassigned<BR /> controller slot=2 logicaldrive all<BR /> controller slot=5 ld 5<BR /> controller slot=5 physicaldrive 1:5<BR /> controller slot=5 physicaldrive 1E:2:3<BR /><BR /><COMMAND> can be "create","delete","modify","show","rescan"<BR />For detailed command information type any of the following:<BR /> help add<BR /> help create<BR /> help delete<BR /> help modify<BR /> help remove<BR /> help shorthand<BR /> help show<BR /> help target<BR /> help rescan<BR /><BR /><BR /><BR />HTH,<BR />Ross</COMMAND></TARGET></COMMAND></TARGET></COMMAND></TARGET> Tue, 06 Sep 2005 11:29:25 GMT https://community.hpe.com/t5/operating-system-linux/modification-of-smartarray-configuration-via-linux-cli/m-p/3619284#M19448 Ross Minkov 2005-09-06T11:29:25Z