https://community.hpe.com/t5/operating-system-linux/how-to-setup-lm-sensors-on-lp1000r-with-redhat-7-3/m-p/2765849#M1963 I see this thread is quite old and there is no answer, but I'll try it anyway.<BR /><BR />I am currently also on to install lm_senors on a LP1000r, but I didn't get very far. Has anyone ever completed this task?<BR /><BR />sensors-detect wasn't of much help, so I tried to manually load the correct drivers (where I am not sure if they are correct):<BR /># modprobe i2c-core<BR /># modprobe i2c-proc<BR /># modprobe i2c-isa<BR /># modprobe w83781d<BR /><BR />I also added the following line to my /etc/modules.conf:<BR />alias char-major-89 i2c-dev<BR /><BR />Still my /proc/sys/dev/sensors/chips stays empty and sensors keeps telling me: No sensors found!<BR /><BR />Anyone out there with any suggesstion?<BR /><BR />Thank you,<BR /><BR />Johannes Pueller Mon, 20 Oct 2003 04:46:13 GMT Johannes Püller 2003-10-20T04:46:13Z https://community.hpe.com/t5/operating-system-linux/how-to-setup-lm-sensors-on-lp1000r-with-redhat-7-3/m-p/2765848#M1962 sensors-detect can modprobe my `i2c-piix4'-driver for ServerWorks South Bridge but never detect any sensors. <BR /><BR />Please, help! Wed, 17 Jul 2002 10:28:15 GMT https://community.hpe.com/t5/operating-system-linux/how-to-setup-lm-sensors-on-lp1000r-with-redhat-7-3/m-p/2765848#M1962 Yuri Novik 2002-07-17T10:28:15Z https://community.hpe.com/t5/operating-system-linux/how-to-setup-lm-sensors-on-lp1000r-with-redhat-7-3/m-p/2765849#M1963 I see this thread is quite old and there is no answer, but I'll try it anyway.<BR /><BR />I am currently also on to install lm_senors on a LP1000r, but I didn't get very far. Has anyone ever completed this task?<BR /><BR />sensors-detect wasn't of much help, so I tried to manually load the correct drivers (where I am not sure if they are correct):<BR /># modprobe i2c-core<BR /># modprobe i2c-proc<BR /># modprobe i2c-isa<BR /># modprobe w83781d<BR /><BR />I also added the following line to my /etc/modules.conf:<BR />alias char-major-89 i2c-dev<BR /><BR />Still my /proc/sys/dev/sensors/chips stays empty and sensors keeps telling me: No sensors found!<BR /><BR />Anyone out there with any suggesstion?<BR /><BR />Thank you,<BR /><BR />Johannes Pueller Mon, 20 Oct 2003 04:46:13 GMT https://community.hpe.com/t5/operating-system-linux/how-to-setup-lm-sensors-on-lp1000r-with-redhat-7-3/m-p/2765849#M1963 Johannes Püller 2003-10-20T04:46:13Z