https://community.hpe.com/t5/operating-system-linux/stinit-def-for-msl5026/m-p/3641038#M19934 Hi,<BR /><BR />I am pretty new to Linux (my distribution is SUSE).<BR />What should be correct stinit.def for MSL5026 (I am not going to use changer) or there is another way to configure tape drives.<BR /><BR />command cat /proc/scsi/scsi produces:<BR />Host: scsi1 Channel: 00 Id: 02 Lun: 00<BR /> Vendor: COMPAQ Model: SuperDLT1 Rev: 5555<BR /> Type: Sequential-Access ANSI SCSI revision: 02<BR />Host: scsi1 Channel: 00 Id: 02 Lun: 01<BR /> Vendor: COMPAQ Model: MSL5000 Series Rev: 0430<BR /> Type: Medium Changer ANSI SCSI revision: 02<BR />Host: scsi1 Channel: 00 Id: 02 Lun: 02<BR /> Vendor: COMPAQ Model: SuperDLT1 Rev: 5555<BR /> Type: Sequential-Access ANSI SCSI revision: 02<BR /><BR />best regards<BR />Michal Tue, 04 Oct 2005 03:40:17 GMT Michal Pegierski 2005-10-04T03:40:17Z https://community.hpe.com/t5/operating-system-linux/stinit-def-for-msl5026/m-p/3641038#M19934 Hi,<BR /><BR />I am pretty new to Linux (my distribution is SUSE).<BR />What should be correct stinit.def for MSL5026 (I am not going to use changer) or there is another way to configure tape drives.<BR /><BR />command cat /proc/scsi/scsi produces:<BR />Host: scsi1 Channel: 00 Id: 02 Lun: 00<BR /> Vendor: COMPAQ Model: SuperDLT1 Rev: 5555<BR /> Type: Sequential-Access ANSI SCSI revision: 02<BR />Host: scsi1 Channel: 00 Id: 02 Lun: 01<BR /> Vendor: COMPAQ Model: MSL5000 Series Rev: 0430<BR /> Type: Medium Changer ANSI SCSI revision: 02<BR />Host: scsi1 Channel: 00 Id: 02 Lun: 02<BR /> Vendor: COMPAQ Model: SuperDLT1 Rev: 5555<BR /> Type: Sequential-Access ANSI SCSI revision: 02<BR /><BR />best regards<BR />Michal Tue, 04 Oct 2005 03:40:17 GMT https://community.hpe.com/t5/operating-system-linux/stinit-def-for-msl5026/m-p/3641038#M19934 Michal Pegierski 2005-10-04T03:40:17Z