topic Envizex on linux through a autosensing hub in Operating System - Linux

Envizex on linux through a autosensing hub

ranjit_2 — Tue, 23 Jul 2002 04:55:09 GMT

I purchased an envizex a series terminal, and am having problems getting it to work with linux. I have installed enware B.0.7.11 and the terminal grags the code ok but,
then gives me a no ethertwist hub detected error

Re: Envizex on linux through a autosensing hub

Alex Glennie — Tue, 23 Jul 2002 06:35:05 GMT

I beleive this is a known issue with some hubs .....
hpux patch extract :

Patch Description: s700_800 10.x HP ENWARE B.07.11.00PL02 06/2000

Symptoms:
PHSS_21691:

1. PANap19385 - B.07.11 always switches to
the alternate file server

When both primary and alternate file-servers are
configured, the XTerm always downloads its code from
the alternate file server.

2. PANap19485 - Envizex and 10/100 networking

When booting through an auto-sensing 10/100 switch
(HP ProCurve 10/100 J3295A), the Envizex could no longer
download the binaries/config. from the server.

Messages are displayed :
"No cable"

"No etherTwist hub detected"

So try installing the patch or
removing the hub or if a switch is also involved try setting the switches value of "spanning tree" to fast option

Re: Envizex on linux through a autosensing hub

ranjit_2 — Wed, 24 Jul 2002 03:32:30 GMT

Where can I find the patch?

Re: Envizex on linux through a autosensing hub

Alex Glennie — Wed, 24 Jul 2002 06:46:19 GMT

http://support1.itrc.hp.com/service/patch/mainPage.do