topic Re: HP DL140 Redhat EL Raid1 boot problem in Operating System - Linux

HP DL140 Redhat EL Raid1 boot problem

bzr — Fri, 11 Nov 2005 02:15:26 GMT

Hi people,
I need help to install redhat enterprise linux 4 on HP DL140 G2 with software raid.

After installing soft, it hangs on:
Grub Loading stage1.5.
Grub Loading,please wait...
Error 15

Please, kindly advise a detailed guideline to solve this use.

Any help appreciated,
Kind regards.

Re: HP DL140 Redhat EL Raid1 boot problem

Kodjo Agbenu — Fri, 11 Nov 2005 03:02:30 GMT

Hi,

This thread may be helpful :

http://forums.gentoo.org/viewtopic.php?t=122656

Good lcuk.
Kodjo

Re: HP DL140 Redhat EL Raid1 boot problem

bzr — Fri, 11 Nov 2005 03:20:33 GMT

Thanks for reply,

Any idea about how grub should be configured to see the raid device (/) ? Raid support is on kernel but as module

Thanks,

Re: HP DL140 Redhat EL Raid1 boot problem

Ivan Ferreira — Fri, 11 Nov 2005 06:39:40 GMT

Where are detailed steps to use software raid with grub.

http://www.linuxsa.org.au/mailing-list/2003-07/1270.html

If you cannot boot, you should ensure that the initial ram disk have the md module in it.

mkinitrd --preload raid1 --with=raid1 /boot/initrd-.img