https://community.hpe.com/t5/operating-system-linux/compile-only-one-kernel-module/m-p/3689368#M20936 To compile one kernel module driver:<BR /><BR />1) You have to configure your kernel first.<BR /> make menuconfig<BR />2) After that You can compile one single kernel driver (for example: ROM file system driver):<BR /> make SUBDIRS=fs/romfs modules <BR /><BR />Regards,<BR />Sergejs Mon, 12 Dec 2005 08:15:21 GMT Sergejs Svitnevs 2005-12-12T08:15:21Z https://community.hpe.com/t5/operating-system-linux/compile-only-one-kernel-module/m-p/3689367#M20935 Hi all<BR /><BR />I would like to compile only one kernel modules (2.4 and 2.6) without launching "make modules" for all them. Is it possibile? No other way than modify the .config?<BR />Thanks All Mon, 12 Dec 2005 07:03:35 GMT https://community.hpe.com/t5/operating-system-linux/compile-only-one-kernel-module/m-p/3689367#M20935 Andrea Rossi 2005-12-12T07:03:35Z https://community.hpe.com/t5/operating-system-linux/compile-only-one-kernel-module/m-p/3689368#M20936 To compile one kernel module driver:<BR /><BR />1) You have to configure your kernel first.<BR /> make menuconfig<BR />2) After that You can compile one single kernel driver (for example: ROM file system driver):<BR /> make SUBDIRS=fs/romfs modules <BR /><BR />Regards,<BR />Sergejs Mon, 12 Dec 2005 08:15:21 GMT https://community.hpe.com/t5/operating-system-linux/compile-only-one-kernel-module/m-p/3689368#M20936 Sergejs Svitnevs 2005-12-12T08:15:21Z