topic Re: External 3Com U.S. Robotics 56K Message Modem fails - help in Operating System - Linux

External 3Com U.S. Robotics 56K Message Modem fails - help

Maaz — Wed, 18 Jan 2006 13:53:22 GMT

Dear Gurus

I have an External "3Com U.S. Robotics 56K Message Modem", that works fine with redhat 7.2 and 9, but this same modem fails to work with RHEL AS 4.

As on rhl 9, I configured the modem and/or dial-up connection via "Internet Configuration Wizard"(after startx i.e. in GUI), and the procedure is just same as in rhl 9. Then in "Int Config Wiz" i select the "ppp0" and click on "Activate" button, and following error received

Cannot activate network device myisp!
Failed to activate myisp with error2

and if i dial from command line, its also fails.

#ifup ppp0

what should I do ?

Any1 can plz let me know any cheap external modem that works with AS 4.

Regards
Maaz

Re: External 3Com U.S. Robotics 56K Message Modem fails - help

Steven E. Protter — Wed, 18 Jan 2006 16:47:34 GMT

Shalom Maaz,

3Com purchased US Robotics. Most of their modems are supported by AS/ES 4 from RedHat.

SEP

Re: External 3Com U.S. Robotics 56K Message Modem fails - help

Maaz — Thu, 19 Jan 2006 00:08:43 GMT

Dear SEP but as i already said that this external modem doesnt work with AS 4.
and Once again plz let me know any cheap external modem that works with AS 4. or how can i know b4 purchasing any external modem that this modem will definitely work with AS 4.

Regards
Maaz

Re: External 3Com U.S. Robotics 56K Message Modem fails - help

Steven E. Protter — Thu, 19 Jan 2006 01:23:48 GMT

I'm shocked!

I'll find you one.

SEP

Re: External 3Com U.S. Robotics 56K Message Modem fails - help

Steven E. Protter — Thu, 19 Jan 2006 01:29:01 GMT

http://www.tldp.org/HOWTO/Hardware-HOWTO/modems.html

Those are PCI, but they surely do work.

http://www.linuxcompatible.org/Can_I_install_Red_Hat_Linux_9_onmy_PC_Please_help_t31768.html
Might want to try FC 2 3 or 4 with your current modem.

http://www.zoom.com/products/dial_up_overview.html
Zoom is great. They have external modems that work with Linux.

SEP

Re: External 3Com U.S. Robotics 56K Message Modem fails - help

Alexander Chuzhoy — Thu, 19 Jan 2006 01:55:14 GMT

Are you installing the modem on the same machine where redhat 7.2/9 were installed ?

Try to see if the com port in bios is open.

Best regards.

Re: External 3Com U.S. Robotics 56K Message Modem fails - help

Maaz — Thu, 19 Jan 2006 12:51:02 GMT

Dear Alexander
>Are you installing the modem on the same machine where redhat 7.2/9 were installed ?
Yes.

>Try to see if the com port in bios is open.
Its a dual-boot machine, i m using this same modem on this machine with windows xp.

Re: External 3Com U.S. Robotics 56K Message Modem fails - help

Maaz — Sun, 22 Jan 2006 11:40:41 GMT

now its working ;), but with a prblm ;(

Here is the solution:

I ran wvdial the following output produced

# wvdial
.
.
--> Cannot open /dev/modem: No such file or directory

from this out I found a clue so I check /dev/modem file, but /dev/modem doesnt exist. I did the following to create the /dev/modem

# cd /dev
# ln -s /dev/ttyS0 /dev/modem
# ls -l /dev/modem
lrwxrwxrwx 1 root root 10 Jan 22 19:45 /dev/modem -> /dev/ttyS0

now Applications->System Tools->Network Device Control->Select the dialup->click on Activate.
I connected the Internet. ;)

But the two prblms
1, whenEver i reboot my machine, /dev/modem lost/deleted, so that I have to create it via
# ln -s /dev/ttyS0 /dev/modem, command after each reboot. Why ?

2, Once I created the syslink "/dev/modem" i can connect to the internet via Point-and-Click, but still #ifup ppp0 fails
# ifup ppp0
/sbin/ifup: configuration for ppp0 not found.
Usage: ifup

3, when i dial no modem sound( i m using dialup modem)

Plz also teach me how to configure the dialup connection from commands or using CLI
Plz Help

Regards
Maaz

Re: External 3Com U.S. Robotics 56K Message Modem fails - help

Maaz — Sun, 22 Jan 2006 11:45:32 GMT

i m still connected to internet but when i ran the command following output produced

#ifdown ppp0
usage: ifdown

#ifconfig ppp0.... shows me public ip.

Regards
Maaz

Re: External 3Com U.S. Robotics 56K Message Modem fails - help

Maaz — Sun, 22 Jan 2006 11:46:38 GMT

# ifconfig ppp0
ppp0 Link encap:Point-to-Point Protocol
inet addr:203.130.13.106 P-t-P:192.168.1.12 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:955 errors:1 dropped:0 overruns:0 frame:0
TX packets:963 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:710686 (694.0 KiB) TX bytes:284606 (277.9 KiB)

Re: External 3Com U.S. Robotics 56K Message Modem fails - help

Maaz — Mon, 23 Jan 2006 13:13:55 GMT

Helo Gurus ...