topic Re: Secure Path on ES update 2 !?! in Operating System - Linux

Secure Path on ES update 2 !?!

Lorenzo Facello — Mon, 23 Jan 2006 04:43:07 GMT

Hi all,
on a I have a Linux ES update 2 and I present
a LUN from a EVA 3000,
I installed Secure Path 3.0c ( that supports ES update1)
on hp web site there is Secure Path V3.0C for Linux Service Pack 2 ( that supports ES update 3-4-5)
Do you know a way to use a secure oath on a Linux ES update2.
thanks
LF

Re: Secure Path on ES update 2 !?!

Lorenzo Facello — Mon, 23 Jan 2006 04:45:00 GMT

and sorry.. another question
I have a qla2312.. I installed the driver
but when I reboot I need to type again insmod qla*
Do you know why?
thanks again

Re: Secure Path on ES update 2 !?!

Steven E. Protter — Mon, 23 Jan 2006 04:51:04 GMT

Lorenzo,

I installed Secure Path 3.0c ( that supports ES update1)
on hp web site there is Secure Path V3.0C for Linux Service Pack 2 ( that supports ES update 3-4-5)

Update 1, not update 2. You should not use a secure path version that is not explicitly supported by HP on hp servers.

Either use update 1 or contact support for a correct version.

Other question:
Can you post /etc/modprobe.conf and the output from /var/log/messages with regards to qlogic.

Have you installed the correct san surfer for your server?

Have you made sure the qlogic cards have the latest firmware? What is the qlogic configuration?

SEP

Re: Secure Path on ES update 2 !?!

Lorenzo Facello — Mon, 23 Jan 2006 05:15:41 GMT

HI SEP!

I did not installed sunsurfer..

I installed the
hp_qla2x00-2005-12-20.tar
from the hp web site

In attach you can find some logs.
thaks
LF