topic Re: How to add VFS support to the Linux 2.4 kernel in Operating System - Linux

How to add VFS support to the Linux 2.4 kernel

Steven E. Protter — Thu, 09 Mar 2006 07:10:04 GMT

I have a customer that wishes to add VFS suppor to the 2.4 kernel on a RedHat box.

I'm not completely clear what the steps are.

What I need to do is:
1) Install VFS support.
2) If needed, recompile the kernel.

Basically I need a cookbook.

Hers is what I have so far and I don't think its enough.

http://en.wikipedia.org/wiki/Virtual_file_system

VFS code:
http://www.faqs.org/docs/kernel_2_4/lki-3.html

How to compile a kernel
http://www.tux.org/lkml/#s4-7
See section 7

A different how to compile a kernel
http://www.faqs.org/docs/Linux-HOWTO/Kernel-HOWTO.html

SEP

Re: How to add VFS support to the Linux 2.4 kernel

Ivan Ferreira — Thu, 09 Mar 2006 07:18:31 GMT

This is extrange, I was sure that VFS was in the kernel 2.4 by default:

http://www.faqs.org/docs/kernel_2_4/lki-3.html

VFS is not another thing but using the same command to perform operations on differents file systems type, for example if you run mkfs, the -t option will call the correct mount command:

mkfs -t ext3
mkfs.ext3
mkfs -t vfat
mkfs.vfat

And so on.

Re: How to add VFS support to the Linux 2.4 kernel

Steven E. Protter — Thu, 09 Mar 2006 07:29:51 GMT

It may be, perhaps the internal customer is not correct.

What I may need is a simple guide as to how to use VFS, which I may have already found.

It would be nice to be sure, hence the thread.

Please confirm to earn a double bunny. I need proof.

SEP

Re: How to add VFS support to the Linux 2.4 kernel

Ivan Ferreira — Thu, 09 Mar 2006 07:40:52 GMT

See also:

http://www.answers.com/topic/virtual-file-system
http://www.cse.unsw.edu.au/~neilb/oss/linux-commentary/vfs.html

The last document describes the vfs interface (as present in Linux 2.3.29).